Take a look at our selection of different 3D Printing parts here! – 3D Printers, PLA Filaments, Motors, Drivers, Belts & more…
3D Printing
Showing all 16 results
- 3D Printing, Motors, Stepper Motors
NEMA-17 Bipolar Stepper Motor with Lead Screw (28cm)
This NEMA 17-size bipolar stepping motor has a lead screw of 280mm with a 1.8 Degree step angle (200 steps/revolution). Both the stepper motor and the brass flange are equiped with M3 threads.
Part Number: MOTOR-222267 - 3D Printing, Motors, Stepper Motors
A4988 Stepper Motor Driver – 2A
The A4988 is a complete microstepping motor driver with a built-in translator for easy operation. The A4988 has 5 modes including full, half, 1/4, 1/8 and 1/16 steps. The driver is able to operate any bipolar stepper motor with an output up to 35V 2A.
Note: This is an A4988 stepper motor driver and is not a product from Pololu Robotics & Electronics.
Part Number: DDDMR-004988 - 3D Printing, Motors, Stepper Motors
A4988 Stepper Motor Driver Black Edition – 2A
Black Edition A4988 stepper motor driver carrier is a higher-performance drop-in replacement for the original A4988 stepper motor driver carrier. It features a four-layer PCB for better thermal performance, allowing the A4988 microstepping bipolar stepper motor driver to deliver approximately 20% more current than our two-layer (green) version. Like our original carrier, the Black Edition offers adjustable current limiting, over-current and over-temperature protection, and five different microstep resolutions. It operates from 8 V to 35 V and can deliver up to 2 A per coil with sufficient additional cooling.
Part Number: PROMR-002129 - 3D Printing, Motors, Stepper Motors
DRV8825 Stepper Motor Driver – 2.2A
The DRV8825 is a complete microstepping motor driver with features such as adjustable current limiting and over-current & temperature protection. The A4988 has 6 microsteping resolution and operates from 8.5 to 45V and can deliver 1.5A per phase without additional cooling.
Note: This is a DRV8825 stepper motor driver and is not a product from Pololu Robotics & Electronics.
Part Number: PROMR-002133 - 3D Printing, Arduino, Arduino Motor Drivers, Microcontrollers, Motors, Stepper Motors
CNC Shield v3.51
3D Printing, Arduino, Arduino Motor Drivers, Microcontrollers, Motors, Stepper MotorsCNC Shield v3.51
The CNC Shield makes it really simple to integrate CNC projects with the Arduino. You can add up to 4x A4988 stepper motor drivers to the CNC shield allowing for independent control of 4 bi-polar stepper motors.
Part Number: ARDCE-005510 - 3D Printing, Arduino, Arduino Motor Drivers, Microcontrollers, Motors, Stepper Motors
RAMPS 1.4 for 3D Printer
3D Printing, Arduino, Arduino Motor Drivers, Microcontrollers, Motors, Stepper MotorsRAMPS 1.4 for 3D Printer
The RAMPS (RepRap Arduino Mega Pololu Shield) is an all-in-one design to fit the necessary components for a 3D printer into one plug in shield. The plug in shield design includes plug in stepper drivers and extruder control electronics sockets for easy service, part replacement, upgrade-ability and expansion. Ramps boards are the heart of most DIY 3D printers on the market and a nice clean compact way to integrate all the systems into a compact enclosure mountable format.
Part Number: DDDAE-000914 - New Products, Sales, 3D Printing, Character LCDs
20×4 Character LCD for RepRap Ramps 1.4
This 20×4 LCD board is used with the RAMPS 1.4 3D printer controller. You simply connect the LCD to the RAMPS board. This control unit has a built in SD card reader, rotary encoder as well as a 20×4 LCD display.
Part Number: DDDLC-204914
