Bearing & Railing

There are 13 products.

  • CAD$9.50 In Stock

    This V slot ball bearing has an inner diameter of 4mm. These bearings are used for slider applications allowing for virtually friction-free movement.  

  • CAD$5.50 In Stock

    These flanged ball bearings has an inner diameter of 1/4" and outer diameter of 1/2". You can use this bearing to run a 1/4" shaft in a 1/2" hole.  

  • CAD$4.50 In Stock

    This linear ball bearing is sort of the opposite of the radial ball bearings you may be familiar with. Its intended to slide along an 8mm linear shaft, rather than rotate around it. These are very slim, and good for when you want to attach a motion carriage onto a railing without adding a lot of weight.

  • CAD$13.00 In Stock

    A rod end bearing, also known as a heim joint or rose joint, is a mechanical articulating joint. Such joints are used on the ends of control rods, steering links, tie rods, or anywhere a precision articulating joint is required. A ball swivel with an opening through which a bolt or other attaching hardware may pass is pressed into a circular casing with a...

  • CAD$14.00 In Stock

    This 4mm shaft collar is can be used with most 4mm shaft for adding stops on the shaft. This shaft collar uses M3 set screws.

  • CAD$4.90 In Stock

    This 8mm shaft collar can be used with most 8mm shaft for adding stops on the shaft. This shaft collar uses M3 set screws.

  • CAD$8.60 In Stock

    This linear ball bearing mount is sort of the opposite of the radial ball bearings you may be familiar with. Its intended to slide along an 8mm linear shaft, rather than rotate around it. There are a total of 6xM4 holes on the bracket for fixing the mount in place.  

  • CAD$7.50 In Stock

    The Pillow Block bearing is very similar to traditional ball bearings where they are widely used in various of machinery, equipment, conveyors, and many more. The compact design on the bearing unit allows for easy mounting and demounting applications.    

  • CAD$7.90 In Stock

    The Pillow Block bearing is very similar to traditional ball bearings where they are widely used in various of machinery, equipment, conveyors, and many more. The compact design on the bearing unit allows for easy mounting and demounting applications.    

  • CAD$10.00 In Stock

    This platform is 34mm x 30mm and has four holes tapped for M4 machine screws so you can attach pretty much anything you want. All you need to get started is two 8mm supports and a precision-ground 8mm rod. Often times, CNC projects will have two of these on opposite sides to support a larger platform.

  • CAD$21.50 In Stock

    This platform is 34mm x 58mm and has four holes tapped for M4 machine screws so you can attach pretty much anything you want. All you need to get started is two 8mm supports and a precision-ground 8mm rod. Often times, CNC projects will have two of these on opposite sides to support a larger platform.  

  • CAD$9.00 In Stock

    This 6mm rail support is used to provide guidance and support for an 6mm linear shaft. Simply slide the rail through the hole and tighten the clamp screw at the top to fix it in place.    

  • CAD$5.80 In Stock

    This 8mm rail support is used to provide guidance and support for an 8mm linear shaft. Simply slide the rail through the hole and tighten the clamp screw at the top to fix it in place.    

No products

To be determined Shipping
CAD$0.00 Total

Check out