Breadboard Adapter

There are 63 products.

  • CAD$3.50 In Stock

    Need to power your breadboard and cannot find a connector that will fit? This 2.1mm barrel breadboard breakout will solve your problem! Simply attach this breakout board to the power rail and you are ready to go!

  • CAD$4.20 In Stock

    Simple breakout board for the 3.5mm audio jack. Use this breakout to allow breadboard or SIP access to the super-common 3.5mm audio jack. All five pins are broken out.

  • CAD$6.45 In Stock

    TRRS connectors are the audio-style connectors that you see on some phones, MP3 players and development boards. TRRS stands for “Tip, Ring, Ring, Sleeve,” which reflects the fact that, unlike a standard stereo connector, this actually has three conductors and a ground. Some devices use the extra conductor for a microphone (like hands-free headsets) or to...

  • CAD$6.00 In Stock

    Simple breakout board for the RCA connector. Use this breakout to allow breadboard or SIP access to the super-common RCA video/audio jack. All three pins are broken out.

  • CAD$5.95 In Stock

    This simple board breaks out a female USB type A connector’s VCC, GND, D- and D+ pins to a 0.1" pitch header. If you want to add a USB to  your project, but don’t want to put up with soldering tiny connectors, this is the board for you.

  • CAD$5.40 Out of stock
    Out of stock

    Simple breakout board for the USB Female Type B Vertical Connector. We primarily designed this board so that you could panel mount a USB connector. Handy when creating those fancy looking enclosures that need a USB port. Breakout board is shipped bare. All four USB pins are broken out.

  • CAD$3.15 In Stock

    This simple board breaks out a micro-B USB connector’s VCC, GND, ID, D- and D+ pins to a 0.1" pitch header. If you want to add the popular micro-B USB to your project, but don’t want to put up with soldering the tiny connector, this is the board for you!

  • CAD$5.60 In Stock

    We have no idea what USB device you are hooking up to, but if you want to access the microUSB port on something, you might want this. We broke out all 5 pins with a vertical microUSB connector for your prototyping needs.

  • CAD$3.25 In Stock

    This new version now has all 5 pins broken out on the connector. We have no idea what USB device you are hooking up to, but if you need to add a miniUSB/USB Mini-B connector to your breadboard - here it is.

  • CAD$6.75 In Stock

    Breakout board for the microSD socket that is not much bigger than your fingernail. Compatible with the SPI interface found on any SD card, this tiny form factor was created for cell phone storage and is perfect for your next MP3 project!

  • CAD$9.50 In Stock

    This is not just a simple breakout board, this microSD adapter goes the extra mile which includes level shifting and onboard regulator.

  • CAD$6.70 In Stock

    RJ45 connectors are the kind that are used for Ethernet jacks, but they make great general purpose connectors when you need a lot of conductors. This is a small PCB that brings out the pins of the RJ45 connector to an in-line 0.1" footprint. Use with break-away headers for breadboarding or create your own RJ45 cable. Check the related items for Ethernet...

  • CAD$11.00 In Stock

    This is the RJ45 MagJack Breakout, a simple board that will provide you with a way to put an ethernet port into your breadboard. The RJ45 MagJack Breakout is the same one found in our very own mbed Starter Kit and breaks out each pin from the ethernet jack. This rev of the breakout is equipped with the RJ45 MagJack connector already soldered to the board...

  • CAD$16.67 In Stock

    This is a full 8-pin breakout for the SIM socket allowing direct access to SIM communication.

  • CAD$1.90 Out of stock
    Out of stock

    This simple breakout board makes it easy to use our LED tactile switches in a breadboard, or your next project.

  • CAD$4.35 In Stock

    Want to add an easy serial and parallel port to your breadboard, but can not find one that fits? With this D-Sub breakoutboard adding a serial port is as simple as plugging it in! This breakout board is made with high quality 2 layer FR4 boards with gold plated 0.025" squre pin terminations.

No products

To be determined Shipping
CAD$0.00 Total

Check out