Take a look at our selection of different Screw Terminals here! – Screw Terminals, Terminal Blocks, Terminal Strips and more…
Screw Terminals
Showing 1–24 of 27 results
- Cables & Connectors, Power Cables & Connectors, Screw Terminals, Power
2.1mm DC Barrel (M) to Terminal Adapter
Cables & Connectors, Power Cables & Connectors, Screw Terminals, Power2.1mm DC Barrel (M) to Terminal Adapter
This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5×2.1mm, center-positive male barrel jack. If you need to connect bare wires to a barrel jack on an Arduino or a development board, this might be the simple solution.
Part Number: ADADC-010287 - Cables & Connectors, Power Cables & Connectors, Screw Terminals, Power
2.1mm DC Barrel (F) to Terminal Adapter
Cables & Connectors, Power Cables & Connectors, Screw Terminals, Power2.1mm DC Barrel (F) to Terminal Adapter
This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5×2.1mm, center-positive female barrel jack. If you have a power supply with a barrel jack and want to plug it into a breadboard, this might be the simple solution.
Part Number: ADADC-010288 - Cables & Connectors, Screw Terminals
2P Screw Terminal Block – 0.1″
This terminal block is a great use for semi-permanent connections. Simply insert the wire and screw down the terminal to tighten the connection. This terminal block has a pitch of 0.1″ (2.54mm) where each contact is rated for 10A.
Note:Colour may vary.
Part Number: TERMB-254002 - Cables & Connectors, Screw Terminals
3P Screw Terminal Block – 0.1″
This terminal block is a great use for semi-permanent connections. Simply insert the wire and screw down the terminal to tighten the connection. This terminal block has a pitch of 0.1″ (2.54mm) where each contact is rated for 10A.
Note: Colour may vary.
Part Number: TERMB-254003 - Cables & Connectors, Screw Terminals
4P Screw Terminal Block – 0.1″
This terminal block is a great use for semi-permanent connections. Simply insert the wire and screw down the terminal to tighten the connection. This terminal block has a pitch of 0.1″ (2.54mm) where each contact is rated for 10A.
Note: Colour may vary.
Part Number: TERMB-254004 - Cables & Connectors, Screw Terminals
5P Screw Terminal Block – 0.1″
This terminal block is a great use for semi-permanent connections. Simply insert the wire and screw down the terminal to tighten the connection. This terminal block has a pitch of 0.1″ (2.54mm) where each contact is rated for 10A.
Note: Colour may vary.
Part Number: TERMB-254005 - Cables & Connectors, Screw Terminals
6P Screw Terminal Block – 0.1″
This terminal block is a great use for semi-permanent connections. Simply insert the wire and screw down the terminal to tighten the connection. This terminal block has a pitch of 0.1″ (2.54mm) where each contact is rated for 10A.
Note: Colour may vary.
Part Number: TERMB-254006 - Cables & Connectors, Screw Terminals
8P Screw Terminal Block – 0.1″
This terminal block is a great use for semi-permanent connections. Simply insert the wire and screw down the terminal to tighten the connection. This terminal block has a pitch of 0.1″ (2.54mm) where each contact is rated for 10A.
Note: Colour may vary.
Part Number: TERMB-254008 - Cables & Connectors, Screw Terminals
10P Screw Terminal Block – 0.1″
This terminal block is a great use for semi-permanent connections. Simply insert the wire and screw down the terminal to tighten the connection. This terminal block has a pitch of 0.1″ (2.54mm) where each contact is rated for 10A.
Note: Colour may vary.
Part Number: TERMB-254010 - Cables & Connectors, Screw Terminals
12P Screw Terminal Block – 0.1″
This terminal block is a great use for semi-permanent connections. Simply insert the wire and screw down the terminal to tighten the connection. This terminal block has a pitch of 0.1″ (2.54mm) where each contact is rated for 10A.
Note: Colour may vary.
Part Number: TERMB-254012 - Cables & Connectors, Screw Terminals
16P Screw Terminal Block – 0.1″
This terminal block is a great use for semi-permanent connections. Simply insert the wire and screw down the terminal to tighten the connection. This terminal block has a pitch of 0.1″ (2.54mm) where each contact is rated for 10A.
Note: Colour may vary.
Part Number: TERMB-254016 - Cables & Connectors, Screw Terminals
2P Screw Terminal Block – 0.137″
This terminal block is a great use for semi-permanent connections. Simply insert the wire and screw down the terminal to tighten the connection. This terminal block has a pitch of 0.137″ (3.4798mm) where each contact is rated for 12A.
Note: Colour may vary.
Part Number: TERMB-008084 - Cables & Connectors, Screw Terminals
3P Screw Terminal Block – 0.137″
This terminal block is a great use for semi-permanent connections. Simply insert the wire and screw down the terminal to tighten the connection. This terminal block has a pitch of 0.137″ (3.4798mm) where each contact is rated for 12A.
Note: Colour may vary.
Part Number: TERMB-008235 - Cables & Connectors, Screw Terminals
2P Screw Terminal Block – 0.2″
This terminal block is a great use for semi-permanent connections. Simply insert the wire and screw down the terminal to tighten the connection. This terminal block has a pitch of 0.137″ (3.4798mm) where each contact is rated for 16A.
Note: Colour may vary.
Part Number: TERMB-522020 - Cables & Connectors, Screw Terminals
2P Screw Terminal Block – 0.2″
This terminal block is a great use for semi-permanent connections. Simply insert the wire and screw down the terminal to tighten the connection. This terminal block has a pitch of 0.2″ (5.08mm) where each contact is rated for 16A.
Note: Colour may vary.
Part Number: TERMB-622020 - Cables & Connectors, Screw Terminals
3P Screw Terminal Block – 0.2″
This terminal block is a great use for semi-permanent connections. Simply insert the wire and screw down the terminal to tighten the connection. This terminal block has a pitch of 0.2″ (5.08mm) where each contact is rated for 16A.
Note: Colour may vary.
Part Number: TERMB-523030 - Cables & Connectors, Screw Terminals
3P Screw Terminal Block – 0.2″
This terminal block is a great use for semi-permanent connections. Simply insert the wire and screw down the terminal to tighten the connection. This terminal block has a pitch of 0.2″ (5.08mm) where each contact is rated for 16A.
Note: Colour may vary.
Part Number: TERMB-623030 - Cables & Connectors, Screw Terminals
2P Terminal Strip
This terminal strip provides a simple way to connect wires to a single connection point. These blocks allow wires to be screwed together and self-isolated without needing to twist, solder or any other splicing, by this method wiring can adjusted at anytime just as easy as it was the first time.
Part Number: TERME-000102 - Cables & Connectors, Screw Terminals
4P Terminal Strip
This terminal strip provides a simple way to connect wires to a single connection point. These blocks allow wires to be screwed together and self-isolated without needing to twist, solder or any other splicing, by this method wiring can adjusted at anytime just as easy as it was the first time.
Part Number: TERME-000104 - Cables & Connectors, Screw Terminals
6P Terminal Strip
This terminal strip provides a simple way to connect wires to a single connection point. These blocks allow wires to be screwed together and self-isolated without needing to twist, solder or any other splicing, by this method wiring can adjusted at anytime just as easy as it was the first time.
Part Number: TERME-000106 - Cables & Connectors, Screw Terminals
8P Terminal Strip
This terminal strip provides a simple way to connect wires to a single connection point. These blocks allow wires to be screwed together and self-isolated without needing to twist, solder or any other splicing, by this method wiring can adjusted at anytime just as easy as it was the first time.
Part Number: TERME-000108 - Cables & Connectors, Screw Terminals
10P Terminal Strip
This terminal strip provides a simple way to connect wires to a single connection point. These blocks allow wires to be screwed together and self-isolated without needing to twist, solder or any other splicing, by this method wiring can adjusted at anytime just as easy as it was the first time.
Part Number: TERME-000110 - Cables & Connectors, Screw Terminals
12P Terminal Strip
This terminal strip provides a simple way to connect wires to a single connection point. These blocks allow wires to be screwed together and self-isolated without needing to twist, solder or any other splicing, by this method wiring can adjusted at anytime just as easy as it was the first time.
Part Number: TERME-000112