Take a look at our selection of different USB Cables & Connectors here! – USB A, USB B, USB C, mini USB, micro USB, OTG and more…
USB
Showing 1–24 of 36 results
- Cables & Connectors, USB
USB Hub with Voltage & Current Tester
This is very simply to a USB hub as it gives you 2 USB outputs from one single USB port. The cool thing about this is that it has both a voltage and current tester which measures the load of your USB device and the voltage supplied from the USB port. This is great for debugging and power issues on your USB as well as keep track on the current draw of your USB devices!
Part Number: USBPW-214072 - Cables & Connectors, USB, Switches & Relays, Latching Buttons
USB (A) to Micro (B) Cable with On/Off Switch – 5ft.
Cables & Connectors, USB, Switches & Relays, Latching ButtonsUSB (A) to Micro (B) Cable with On/Off Switch – 5ft.
This USB cable can be used to carry only be used for power. This cable has a USB type A male header on one end and a male micro USB header on the other. The cable also has a bulit-in inline switch making it great for adding a power switch for the Raspberry Pi. The total length of this cable is 5ft. (60 inches).
Part Number: ZCABL-200510 - Cables & Connectors, USB
Cerberus USB Cable – 6ft.
The Cerberus is a three-headed cable-beast that will ensure that you re never stuck looking for a USB cable that fits your device. At one end of the Cerberus you have the standard A-type connector, which you can plug into your computer or USB power supply; At the other end are three common USB connectors: B, mini-B and micro-B.The Cerberus can transfer both power and data just like any USB cable and now comes standard with a USB hub so you will be able to connect up to three data devices at the same time! Thanks to the improvements we made to this Cerberus no longer will you run into issues when transferring large amounts of data (hard drives, flash drives, etc) or connecting Android and other mobile devices.
Part Number: ZCABL-011515 - Cables & Connectors, USB, Switches & Relays, Latching Buttons
USB Cable with On/Off Switch
This is USB A-micro B cable with a bulid in On/Off switch. This cable is perfect for adding a power switch to any USB device!
The in-line switch is rated for 2A. The data lines are not connected through – this is a ground/5V power switch only! The switch is on the positive 5V line. A great match for our USB wall adapters or battery packs.
Part Number: ZCABL-200550 - Cables & Connectors, USB
USB (A) Panel Extension Cable – 1ft.
This cable is a USB type A panel mount extension cable with a total length of 1ft. This cable is perfect for placing a device that has a USB type A port into an enclosed box. Two 4-40 screws are used to attach the female socket end which is 30mm apart.
Part Number: ZCABU-020908 - Cables & Connectors, USB
USB (B) Panel Extension Cable – 1ft.
This cable is a USB type B panel mount extension cable with a total length of 1ft. This cable is perfect for placing a device that has a USB type B port into an enclosed box. Two 4-40 screws are used to attach the female socket end which is 30mm apart.
Part Number: ZCABU-020937
