Character LCD

There are 16 products.

  • CAD$27.50 In Stock

    This is a breadboard friendly, 2.54mm pitch, I2C controlled 8x2 characters LCD board for 5V microcontroller. It has the pull-up resistors for I2C bus in it. It is the 2.54mm pitch, so you can plug in the breadboard and Arduino. The pin assignment is same as Arduino Uno “Analog” pins which are used for I2C connection. It has the pull-up resistors for I2C...

  • CAD$13.25 In Stock

    This is a basic 16 character by 2 line display with a snazzy blue backlight with white characters. Utilizes the extremely common HD44780 parallel interface chipset. Interface code is freely available.  

  • CAD$19.25 In Stock

    This is a basic 16 character by 2 line display with a snazzy black backlight with red characters. Utilizes the extremely common HD44780 parallel interface chipset. Interface code is freely available.

  • CAD$18.75 In Stock

    This is similar to other 16x2 character LCDs that you’ve seen before but with one vibrant difference: The backlight is actually an RGB LED. This means that you can change the backlight of this display to any color you want by controlling the three backlight levels. It also utilizes an extremely common parallel interface so code is freely available (check...

  • CAD$23.00 In Stock

    This is a fancy upgrade to standard 16x2 LCDs, instead of just having blue and white, or red and black, this LCD has full color RGB characters on a dark/black background! That means you can change the character display colors to anything you want - red, green, blue, pink, white, purple yellow, teal, salmon, chartreuse. This LCD looks strikingly good in...

  • CAD$19.50 In Stock

    This is a basic 20 character by 4 line display with a snazzy blue backlight with white characters. Utilizes the extremely common HD44780 parallel interface chipset. Interface code is freely available.  

  • CAD$23.50 In Stock

    An LCD display that can display a max of 16x2 characters. with the help of the I2C bus convertor and related libraried, you can easily use this module with just 2 wires.

  • CAD$27.85 In Stock

    This LCD enables you to set the color to whatever you like via the simple interface. It takes I2C as communication method with your microcontroller. So number of pins required for data exchange and backlight control shrinks from ~10 to 2, relieving IOs for other challenging tasks. Besides, Grove - LCD RGB Backlight supports user-defined characters. Want...

  • CAD$28.85 In Stock

    An LCD display that can display a max of 20x4 characters. with the help of the I2C bus convertor and related libraried, you can easily use this module with just 2 wires.

  • CAD$32.15 In Stock

    This is the latest evolution of our serial LCD. Included on a single board is a 16x2 LCD and an embedded circuit based around a PIC 16F88. The on-board PIC takes a TTL serial input and prints the characters it receives onto the LCD. The installed firmware also allows for a number of special commands so you can clear the screen, adjust the backlight...

  • CAD$19.50 In Stock

    This is a 16 character by 2 line display that runs at 3.3V. Utilizes the common ST7066/HD44780 parallel interface. Interface code is widely available for many different controllers and systems.

  • CAD$19.35 In Stock

    This is a 16 character by 2 line display that runs at 3.3V. Utilizes the common ST7066/HD44780 parallel interface. Interface code is widely available for many different controllers and systems.

  • CAD$17.50 In Stock

    LCD backpacks reduce the number of pins needed to connect to an LCD. LCDs are a fun and easy way to have your microcontroller project talk back to you. Character LCDs are common, and easy to get, available in tons of colors and sizes. 

  • CAD$18.95 In Stock

    The LCD Keypad Shield is an easy way to integrate a character display with the Arduino. This is a 16x2 Character LCD with white text on blue backlight.

  • CAD$29.00 In Stock

    This new Adafruit shield makes it easy to use a 16x2 Character LCD. We really like the Blue & White 16x2 LCDs we stock in the shop. Unfortunately, these LCDs do require quite a few digital pins, 6 to control the LCD and then another pin to control the backlight for a total of 7 pins. That's almost half of the pins available on a classic Arduino!

  • CAD$25.00 In Stock

    This LCD & Keypad Hat for Raspberry Pi uses a white on blue LCD which can be controlled with I2C. Simply snap the hat on top of your Raspberry Pi and load the code to start displaying right away! 

No products

To be determined Shipping
CAD$0.00 Total

Check out