Drill Bit

There are 13 products.

  • CAD$29.50 In Stock

    This drill bit set is perefect for cleaning the nozzles on 3D printers when it gets clogged. There are 5 types of drills included in the pack which consists of 0.2mm 0.3mm, 0.35mm, 0.4mm and 0.5mm sizes which are suitable for nozzles of 0.2mm to 0.5mm. By using these precision drill bits, you will certainly extend the life of your 3D printer nozzle.

  • CAD$1.50 In Stock

    This drill bit is can be used for drilling through circuit boards, plastics boards, and even many types of metal. The diameter of this drill bit is 0.6mm.

  • CAD$1.00 In Stock

    This drill bit is can be used for drilling through circuit boards, plastics boards, and even many types of metal. The diameter of this drill bit is 0.8mm.

  • CAD$1.00 In Stock

    This drill bit is can be used for drilling through circuit boards, plastics boards, and even many types of metal. The diameter of this drill bit is 1mm.

  • CAD$1.00 In Stock

    This drill bit is can be used for drilling through circuit boards, plastics boards, and even many types of metal. The diameter of this drill bit is 1.3mm.

  • CAD$1.00 In Stock

    This drill bit is can be used for drilling through circuit boards, plastics boards, and even many types of metal. The diameter of this drill bit is 1.4mm.

  • CAD$1.00 In Stock

    This drill bit is can be used for drilling through circuit boards, plastics boards, and even many types of metal. The diameter of this drill bit is 2.5mm.

  • CAD$1.00 In Stock

    This drill bit is can be used for drilling through circuit boards, plastics boards, and even many types of metal. The diameter of this drill bit is 2.8mm.

  • CAD$1.00 In Stock

    This drill bit is can be used for drilling through circuit boards, plastics boards, and even many types of metal. The diameter of this drill bit is 3.0mm.

  • CAD$1.00 In Stock

    This drill bit is can be used for drilling through circuit boards, plastics boards, and even many types of metal. The diameter of this drill bit is 3.2mm.

  • CAD$7.45 In Stock

    These end mill are slightly different than PCB drill bits. Drill bits can only cut in an axial direction, meaning in line with the axis of the bit - or up and down on the PCB.  End mills can move in any direction so you can drill side to side, up and down, etc. The cutting part is made from tungsten carbide and are suitable for circuit board cutting and...

  • CAD$7.35 In Stock

    These end mill are slightly different than PCB drill bits. Drill bits can only cut in an axial direction, meaning in line with the axis of the bit - or up and down on the PCB.  End mills can move in any direction so you can drill side to side, up and down, etc. The cutting part is made from tungsten carbide and are suitable for circuit board cutting and...

  • CAD$7.35 In Stock

    These end mill are slightly different than PCB drill bits. Drill bits can only cut in an axial direction, meaning in line with the axis of the bit - or up and down on the PCB.  End mills can move in any direction so you can drill side to side, up and down, etc. The cutting part is made from tungsten carbide and are suitable for circuit board cutting and...

No products

To be determined Shipping
CAD$0.00 Total

Check out