Grove System

There are 20 products.

  • CAD$17.85 In Stock

    As an expansion board, Base Shield v2 has many Grove connectors, making it convenient for you to use Grove products together. And It is compatible with a series of Arduino products. Power Compatible: Every Grove connector has four wires, one of which is Vcc. However, not every micro-controller main board needs a supply voltage of 5V, some need 3.3V....

  • CAD$19.25 In Stock

    This module is based on the I2C light-to-digital converter TSL2561 to transform light intensity to a digital signal. Different from traditional analog light sensor, as Grove - Light Sensor, this digital module features a selectable light spectrum range due to its dual light sensitive diodes: infrared and full spectrum.   

  • CAD$5.85 In Stock

    The temperature sensor uses a thermistor which returns the ambient temperature in the form of a resistance value, which is then used to alter Vcc (5V with our Seeeduinos). Our board then converts this voltage value measured by an analog input pin to a temperature. The operating range is -40 to 125°C , with an accuracy of 1.5°C .

  • CAD$5.95 Out of stock
    Out of stock

    This water sensor module is part of the Twig system. This sensor works by having a series of exposed traces connected to ground and interlaced between the grounded traces are the sens traces. The sensor traces have a weak pull-up resistor of 1 MΩ. The resistor will pull the sensor trace value high until a drop of water shorts the sensor trace to the...

  • CAD$29.50 In Stock

    Sensor is to create Digital (Lo Pulse) output to Particulate Matters (PM). Lo Pulse Occupancy time (LPO time) is in proportion to PM concentration. The output is for PM whose size is around 1 micro meter or larger. We can use the sensor to detect the dust in clean room. 

  • CAD$17.55 Out of stock
    Out of stock

    The sensor is designed for indoor air quality testing. The main gas detected is carbon monoxide, alcohol, acetone, thinner, formaldehyde and other slightly toxic gases. It is compatible with 5V and 3.3V power supply.

  • CAD$15.85 In Stock

    Alcohol sensor is semiconductor sensor for alcohol detection. It has good sensitivity and fast response to alcohol, suitable for portable alcohol detector.

  • CAD$17.50 In Stock

    Grove - I2C FM Receiver is a wideband FM receiver module,this module is base on RDA5807M,The RDA5807M series is the newest generation single-chip broadcast FM stereo radio tuner with fully integrated synthesizer, The RDA5807M series has a powerful low-IF digital audio processor.Grove - I2C FM Receiver have a headset jack,it can driver earphone or audio. 

  • CAD$18.50 In Stock

    The SPDT Relay(30A) is a high quality Single Pole Double Throw Relay(SPDT).The Relay consist of a coil, 1 common terminal, 1 normally closed terminal, and one normally open terminal. When the coil of the relay is at rest (not energized), the common terminal and the normally closed terminal have continuity. When the coil is energized, the common terminal...

  • CAD$18.75 In Stock

    This module is based on 2-Coil Latching Relay. Contrast to the ordinary relay, this latching relay do not need continuous power to keep the state, only a rising/falling pulse is needed to change the work state. Even the power can be removed when the work state do not need to change, making this module especially suitable for low-power projects.

  • CAD$5.50 In Stock

    What does “P” mean? “P” is for “panel mount” in this product. This Grove – Switch is a mini SPDT slide, great for “ON/OFF” situations. It’s such a reliable switch of great build quality that we adopt it on many of our boards. You should stock some for your Grove prototyping system.  

  • CAD$4.50 In Stock

    What does “P” mean? “P” is for “panel mount” in this product. This Grove – Button is a sister version of original Grove - Button. They are identical except the Grove connecter is moved to the back so that you can easily use it as a neat and wire-free human interface device.

  • CAD$3.30 In Stock

    JST (PH) connectors are great for high current connections and are often used for lithium ion batteries. This is a 4 pin JST (PH) wire assembly.

  • CAD$3.20 In Stock

    JST (PH) connectors are great for high current connections and are often used for lithium ion batteries. This is a 3 pin JST (PH) to pin cable.

  • CAD$3.50 In Stock

    JST (PH) connectors are great for high current connections and are often used for lithium ion batteries. This is a 3 pin JST (PH) to indivdual jumper pin cable.

  • CAD$3.50 In Stock

    JST (PH) connectors are great for high current connections and are often used for lithium ion batteries. This is a 3 to 4 pin JST (PH) converting cable.

No products

To be determined Shipping
CAD$0.00 Total

Check out