Hardware

There are 219 products.

  • CAD$10.80 In Stock

    These beefy aluminum enclosures may look rough, but they’re built tough. This 2mm-thick, die-cast enclosure is rated IP54 against dust and splashing water. Because it’s aluminum, it’s easy to cut and drill so that you can add LCD screens, buttons and cable connections. If you want to “pretty up” your project, hit this with some fine-grit sand paper and...

  • CAD$8.50 In Stock

    These beefy aluminum enclosures may look rough, but they’re built tough. This 2mm-thick, die-cast enclosure is rated IP54 against dust and splashing water. Because it’s aluminum, it’s easy to cut and drill so that you can add LCD screens, buttons and cable connections. If you want to “pretty up” your project, hit this with some fine-grit sand paper and...

  • CAD$4.95 In Stock

    Need a enclosure to put your project in? This handy plastic enclosure is very durable, easy to drill, and which is a great use for enclosuing your project together!

  • CAD$7.80 In Stock

    Need an enclosure to put your project in? This handy plastic enclosure is durable and easy to drill; making it a great use for enclosing your project together!

  • CAD$9.50 In Stock

    Need an enclosure to put your project in? This handy plastic enclosure is durable and easy to drill; making it a great use for enclosing your project together!

  • CAD$12.50 In Stock

    Need an enclosure to put your project in? This handy plastic enclosure is durable and easy to drill; making it a great use for enclosing your project together!

  • CAD$2.40 In Stock

    This set of gears contains 40, 30, 20 and 12 tooth gears and 3 bushings. The 12 tooth motor spindle has a hole diameter of 2mm, where the 40, 30, 20 tooth gears all have a hole diameter of 3/16".

  • CAD$2.40 In Stock

    This set of gears contains 40, 30, 20 and 12 tooth gears and 3 bushings. The 12 tooth motor spindle has a hole diameter of 2mm, where the 40, 30, 20 tooth gears all have a hole diameter of 3/16".

  • CAD$2.40 In Stock

    This set of gears contains 40, 30, 20 and 12 tooth gears and 3 bushings. The 12 tooth motor spindle has a hole diameter of 2mm, where the 40, 30, 20 tooth gears all have a hole diameter of 3/16".

  • CAD$12.00 In Stock

    This pack of associated gear and belt comes with a total of 80 pieces. Theses gears are perfect for making your own little gearbox. 

  • CAD$5.25 In Stock

    This 16 teeth gear has a center diameter of 4mm allowing you to connect it to any 4mm shafts. The gear can be tighten using the M3 set screw. This gear is made with anodized aluminum to minimize any rusting.

  • CAD$8.50 In Stock

    This 48 teeth gear has a center diameter of 8mm allowing you to connect to any 8mm shafts. The gear can be mounted with M4 hardware using our 4mm Mounting Hub. This gear is made with anodized aluminum to minimize any rusting.

  • CAD$9.95 In Stock

    This 80 teeth gear has a center diameter of 8mm allowing you to connect to any 8mm shafts. The gear can be mounted with M4 hardwares using our 4mm Mount Hub. This gear is made with anodized aluminum to minimize any rusting.

  • CAD$6.00 In Stock

    These fine drive belt are made with rubber which can be used as engine drive belts for small DIY cars. This pack of drive belt consists of an assortment of 30mm to 120mm belts.

  • CAD$4.00 In Stock

    Timing belts are a fantastic way to transfer rotational motion into linear motion and these GT2 belts are excellent for the task. Often used for precision 3D printers and CNC machines. This belt is 280mm in length and 6mm in width with 2mm pitch. It comes in a loop but you can of course cut it down if you need a shorter length.

  • CAD$21.50 In Stock

    Timing belts are a fantastic way to transfer rotational motion into linear motion and these GT2 belts are excellent for the task. Often used for precision 3D printers and CNC machines. This belt is 1164mm long with 2mm pitch and 6mm wide. It comes in a loop but you can of course cut it down if you need a shorter length.

No products

To be determined Shipping
CAD$0.00 Total

Check out