Hardware

There are 143 products.

  • CAD$3.99 In Stock

    Standoffs are a great way to mount your project to something! This pack consists of four 4-40 F-F standoffs which are compatiable with any 4-40 screws.

  • CAD$10.80 In Stock

    These beefy aluminum enclosures may look rough, but they’re built tough. This 2mm-thick, die-cast enclosure is rated IP54 against dust and splashing water. Because it’s aluminum, it’s easy to cut and drill so that you can add LCD screens, buttons and cable connections. If you want to “pretty up” your project, hit this with some fine-grit sand paper and...

  • CAD$8.50 In Stock

    These beefy aluminum enclosures may look rough, but they’re built tough. This 2mm-thick, die-cast enclosure is rated IP54 against dust and splashing water. Because it’s aluminum, it’s easy to cut and drill so that you can add LCD screens, buttons and cable connections. If you want to “pretty up” your project, hit this with some fine-grit sand paper and...

  • CAD$4.95 In Stock

    Need a enclosure to put your project in? This handy plastic enclosure is very durable, easy to drill, and which is a great use for enclosuing your project together!

  • CAD$7.80 In Stock

    Need an enclosure to put your project in? This handy plastic enclosure is durable and easy to drill; making it a great use for enclosing your project together!

  • CAD$9.50 In Stock

    Need an enclosure to put your project in? This handy plastic enclosure is durable and easy to drill; making it a great use for enclosing your project together!

  • CAD$12.50 In Stock

    Need an enclosure to put your project in? This handy plastic enclosure is durable and easy to drill; making it a great use for enclosing your project together!

  • CAD$6.00 In Stock

    These fine drive belt are made with rubber which can be used as engine drive belts for small DIY cars. This pack of drive belt consists of an assortment of 30mm to 120mm belts.

  • CAD$4.00 Out of stock
    Out of stock

    Timing belts are a fantastic way to transfer rotational motion into linear motion and these GT2 belts are excellent for the task. Often used for precision 3D printers and CNC machines. This belt is 280mm in length and 6mm in width with 2mm pitch. It comes in a loop but you can of course cut it down if you need a shorter length.

  • CAD$21.50 In Stock

    Timing belts are a fantastic way to transfer rotational motion into linear motion and these GT2 belts are excellent for the task. Often used for precision 3D printers and CNC machines. This belt is 1164mm long with 2mm pitch and 6mm wide. It comes in a loop but you can of course cut it down if you need a shorter length.

  • CAD$19.00 In Stock

    Timing belts are a fantastic way to transfer rotational motion into linear motion and these GT2 belts are excellent for the task. Often used for precision 3D printers and CNC machines. This belt is 2004mm long with 2mm pitch and 6mm wide. It comes in a loop but you can of course cut it down if you need a shorter length.

  • CAD$54.00 In Stock

    Timing belts are a fantastic way to transfer rotational motion into linear motion and these GT2 belts are excellent for the task. Often used for precision 3D printers and CNC machines. This belt is 5000mm long with 2mm pitch and 8mm wide. It comes in a loop but you can of course cut it down if you need a shorter length.

  • CAD$9.00 In Stock

    This is an 16 teeth 5mm inner bore pulley. There are 2 set screws which are used to secure the pulley onto a 5mm shaft. This pulley is made for GT2 belts which are 6mm wide. 

  • CAD$9.50 Out of stock
    Out of stock

    This is an 18 teeth 4mm inner bore pulley. There are 2 set screws which are used to secure the pulley onto a 4mm shaft. This pulley is made for GT2 belts which are 8mm wide. 

  • CAD$13.75 In Stock

    This is an 20 teeth 5mm inner bore pulley. There are 2 set screws which are used to secure the pulley onto a 5mm shaft. This pulley is made for GT2 belts which are 6mm wide. 

  • CAD$17.50 In Stock

    This is an 36 teeth 5mm inner bore pulley. There are 2 set screws which are used to secure the pulley onto a 5mm shaft. This pulley is made for GT2 belts which are 6mm wide. 

No products

To be determined Shipping
CAD$0.00 Total

Check out