There are 28 products.
- $13.00 In Stock
This is very simply to a USB hub as it gives you 2 USB outputs from one single USB port. The cool thing about this is that it has both a voltage and current tester which measures the load of your USB device and the voltage supplied from the USB port. This is great for debugging and power issues on your USB as well as keep track on the current draw of your...
- $7.75 In Stock
This is USB A-micro B cable with a bulid in On/Off switch. This cable is perfect for adding a power switch to any USB device! The in-line switch is rated for 2A. The data lines are not connected through - this is a ground/5V power switch only! The switch is on the positive 5V line. A great match for our USB wall adapters or battery packs.
- $7.85 In Stock
This USB cable can be used to carry only be used for power. This cable has a USB type A male header on one end and a male micro USB header on the other. The cable also has a bulit-in inline switch making it great for adding a power switch for the Raspberry Pi. The total length of this cable is 5ft. (60 inches).
- $12.50 In Stock
The Cerberus is a three-headed cable-beast that will ensure that you’re never stuck looking for a USB cable that fits your device. At one end of the Cerberus you have the standard A-type connector, which you can plug into your computer or USB power supply; At the other end are three common USB connectors: B, mini-B and micro-B.The Cerberus can transfer...
- $7.40 In Stock
The Hydra brings the 5V and GND lines from your USB power supply, computer or otherwise, and breaks those lines out into three common power connectors: Barrel Plug, JST and Alligator Clips! The clips are shrouded to avoid shorts and the barrel plug is center positive. The cable is 6 feet long overall which give you plenty of room to work.
- $8.50 In Stock
This handy USB extension cable will make it easy for you to enclose a device that has a A type (USB host) port. We think this would be most handy when putting a Beagle Bone, Raspberry Pi or Mintyboost into a box. The jack half has two mounting 'ears' with 4-40 screws installed, 30mm apart. The ears are flexible so the holes don't have to drilled very...