Heatsink

There are 8 products.

  • CAD$4.70 In Stock

    This is a 25g heatsink compound. This is used for connecting a component with a heatsink.This compound can be used for components such as voltage regulators, MOSFETs, motor drivers, audio amplifiers, etc.

  • CAD$3.80 In Stock

    You can use thermal tape instead of thermal paste. This thermal tape comes with adhesive on both sides. The thermal conductivity is 0.8W/m-K.

  • CAD$3.20 In Stock

    The heat sink is a 0.27" x 0.27" (6.7mm x 6.7mm) square with four round 'fins' sticking out the top. The total height is 0.3" (7.6mm) but you can easily file it down if you need a shorter heat sink to fit in a case). Simply use thermal tape or a small amount of thermal paste to attach to the top of any flat chip. There is no thermal tape included with...

  • CAD$3.50 In Stock

    The heat sink is a 0.4" x 0.4" (10mm x 10mm) square with nine round 'fins' sticking out the top. The total height is 0.3" (7.6mm) but you can easily file it down if you need a shorter heat sink to fit in a case). Simply use thermal tape or a small amount of thermal paste to attach to the top of any flat chip. There is no thermal tape included with this...

  • CAD$4.50 In Stock

    The heat sink is a 0.5" x 0.5" (12.5mm x 12.5mm) square with nine round 'fins' sticking out the top. The total height is 0.4" (10mm) but you can easily file it down if you need a shorter heat sink to fit in a case). Simply use thermal tape or a small amount of thermal paste to attach to the top of any flat chip. There is no thermal tape included with this...

  • CAD$3.50 In Stock

    This set of heat sink is made specifically for the Raspberry! Just apply this heat sink set if you find your Raspberry Pi is overheating. Each individual heat sink comes with thermal tape at the bottom for easy installment.

  • CAD$0.70 In Stock

    This heatsink is great for any TO-220 package components, simply add some thermal tape or paste on and you are ready to go! The physical size of this heatsink is 20x14x10mm.

  • CAD$7.20 In Stock

    This beefy heatsink is designed to dissipate a lot of heat! The 6400BG heatsink fits TO-220, TO-218, TO-247, and Multiwatt packages - which means it’s a great fit for the STA540, L298N, and all of the T-220 package voltage regulators.

No products

To be determined Shipping
CAD$0.00 Total

Check out