IMU

There are 8 products.

  • CAD$124.99 In Stock

    The 6DOF Atomic is a stripped-down IMU, designed to give good performance. The unit can run as a hard-wired UART interface (0-3.3V, 115200bps), or optionally with an XBee RF module, and is powered from a single LiPo (Lithium Polymer) battery. The processor is an Atmel ATMega328 running at 10MHz with 6 dedicated 10-bit ADC channels reading the sensors....

  • CAD$27.00 In Stock

    The MPU-6050 is a serious little piece of motion processing tech! By combining a MEMS 3-axis gyroscope and a 3-axis accelerometer on the same silicon die together with an onboard Digital Motion Processor™ (DMP™) capable of processing complex 9-axis MotionFusion algorithms, the MPU-6050 does away with the cross-axis alignment problems that can creep up on...

  • CAD$27.50 In Stock

    The MinIMU-9 v3 is an inertial measurement unit (IMU) that packs an L3GD20H 3-axis gyro and an LSM303D 3-axis accelerometer and 3-axis magnetometer onto a tiny 0.8″ × 0.5″ board. An I²C interface accesses nine independent rotation, acceleration, and magnetic measurements that can be used to calculate the sensor’s absolute orientation. The MinIMU-9 v3...

  • CAD$48.00 In Stock

    If you've ever ordered and wire up a 9-DOF sensor, chances are you've also realized the challenge of turning the sensor data from an accelerometer, gyroscope and magnetometer into actual "3D space orientation"! Orientation is a hard problem to solve. The sensor fusion algorithms (the secret sauce that blends accelerometer, magnetometer and gyroscope data...

  • CAD$16.50 In Stock

    The MPU-9250 IMU Breakout features the latest 9-axis MEMS sensor from InvenSense. The MPU-9250 combines both the MPU-6500 3-axis accelerometer and 3-axis gyroscope as well as the AKB963 3-axis magnetometer. 

  • CAD$36.00 In Stock

    This is a compact 10DOF IMU is based on the ADXL345, L3G4200D, HMC5883L and BMP180 sensors.  

  • CAD$33.00 In Stock

    This is a compact 10DOF IMU is based on the MPU6050, HMC5883L and BMP085 sensors. The MPU6050 which is the world’s first integrated 6-axis motion tracking device, that combines a 3-axis gyroscope, and a 3-axis accelerometer with a digital motion processor™ (DMP). The HMC5883L is a 3-axis digital compass. The BMP085 is a high-accuracy barometric pressure...

  • CAD$25.00 In Stock

    This compact 10 DOF IMU is based off of the MPU9255 and BMP180 sensors. You can measure acceleration, rotational motion, magnetic field, pressure and temperature with this compact IMU.

No products

To be determined Shipping
CAD$0.00 Total

Check out