Infrared

There are 18 products.

  • CAD$9.75 In Stock

    This module features a fixed-gain, 38 kHz modulated IR sensor and a corresponding IR LED with oscillator circuit to make a tiny proximity sensor. This high-brightness version draws an average of 16 mA and has a typical sensing range up to approximately 24 inches (60 cm).

  • CAD$14.50 In Stock

    The GP2Y0A51SK0F is the shortest-range Sharp analog distance sensor we carry, featuring a detection range of 0.8″ to 6″ (2 cm to 15 cm). The shorter range gives you higher resolution measurements, and the low minimum detection distance makes this sensor great for detecting very close objects. The distance is indicated by an analog voltage, making this...

  • CAD$14.50 In Stock

    The GP2Y0A41SK0F Sharp analog distance sensor features a detection range of 1.5″ to 12″ (4 cm to 30 cm). The shorter range gives you higher resolution measurements, and the lower minimum detection distance makes this sensor great for detecting very close objects. The distance is indicated by an analog voltage, making this sensor very easy to use.

  • CAD$19.50 In Stock

    The GP2Y0A21 Sharp distance sensor is a great way to add obstacle avoidance or motion sensing to your robot or any other project. With a detection range of 4″ to 32″ (10 cm to 80 cm) and an analog voltage indicating the distance, this sensor is very easy to use.

  • CAD$17.25 In Stock

    The GP2Y0A60SZ distance sensor from Sharp offers a wide detection range of 4″ to 60″ (10 cm to 150 cm) and a high update rate of 60 Hz. The distance is indicated by an analog voltage, so only a single analog input is required to interface with the module. The sensor ships installed on our compact carrier board, which makes it easy to integrate this great...

  • CAD$17.25 In Stock

    The GP2Y0A60SZ distance sensor from Sharp offers a wide detection range of 4″ to 60″ (10 cm to 150 cm) and a high update rate of 60 Hz. The distance is indicated by an analog voltage, so only a single analog input is required to interface with the module. The sensor ships installed on our compact carrier board, which makes it easy to integrate this great...

  • CAD$5.25 In Stock

    The OPB742 is a infrared reflectance sensor with a sensing distance of 3.81mm.  

  • CAD$2.95 In Stock

    The ORD1114 is a infrared reflectance sensor with a sensing distance of 1.27mm.  

  • CAD$1.70 In Stock

    The TCRT5000L is a infrared reflectance sensor with a sensing range of 2.5mm.  

  • CAD$6.80 In Stock

    This IR reflective sensor utilizes a TCRT5000 to detect color and distance. This sensor is often used in line following robots, because this module can sense if a surface is white or black. The measuring distance range range from 1mm to 8mm, where the central point is set to 2.5mm. There is also an on-board potentiometer to adjust the sensitivity.

  • CAD$14.25 In Stock

    This 4 Channel IR Reflectance Sensor includes 4 independent IR sensors. Each IR reflective sensor is composed of an IR emitter and a receiver, if something is in the measuring range, the sensor will output a signal. There are also 4 potentiometers on the board which allows for adjustment of measuring range.

  • CAD$3.99 In Stock

    The QTR-1A reflectance sensor carries a single infrared LED and phototransistor pair in an inexpensive, tiny 0.5" x 0.3" module that can be mounted almost anywhere and is great for edge detection and line following. The reflectancemeasurement is output as an analog voltage.

  • CAD$17.95 In Stock

    This sensor module has 8 IR LED/phototransistor pairs mounted on a 0.375" pitch, making it a great detector for a line-following robot. Pairs of LEDs are arranged in series to halve current consumption, and a MOSFET allows the LEDs to be turned off for additional sensing or power-savings options. Each sensor provides a separate analog voltage output.

  • CAD$29.50 In Stock

    Sensor is to create Digital (Lo Pulse) output to Particulate Matters (PM). Lo Pulse Occupancy time (LPO time) is in proportion to PM concentration. The output is for PM whose size is around 1 micro meter or larger. We can use the sensor to detect the dust in clean room. 

  • CAD$22.00 In Stock

    The DSM501 dust sensor senses the density of particles in the air. It can be used to quantitative particle (> 1 micron) measurement; which can sense tobacco smoke, pollen, and dust particles. The sensor consists of a light emitting diode, detector, signal amplifier circuit and heater, it can be used in applications such as the air cleaner or air purifier.  

  • CAD$21.00 In Stock

    An infrared emitting diode and a phototransistor are diagonally arranged into this device, which allows it to detect the reflected light of dust in air. It is especially effective in detecting very fine particles like cigarette smoke and air purifier systems. The sensor has a very low current consumption (20mA max, 11mA typical), and can be powered with...

No products

To be determined Shipping
CAD$0.00 Total

Check out