LCD

There are 19 products.

  • CAD$13.99 In Stock

    The Nokia 5110 is a graphic LCD screen which are used for many applications; originally designed as a cell phone screen. The driver chip which this LCD uses is the PCD8544. The PCD8544 is a low power CMOS LCD controller/driver, designed to drive a graphic display of 48 rows and 84 columns.

  • CAD$12.95 In Stock

    This 1.44" color TFT LCD display has 128 x 128 resolution with 262 color. This LCD uses SPI interface to communicate with controller such as the Arduino.

  • CAD$12.50 CAD$17.00 In Stock
    Reduced price!

    This is a 0.96" OLED display which consists a total of 128x64 (8192) individual blue OLED pixels, each one is turn on/off with the onboard controller chip. You can control this display with the I2C or SPI communications. The default configuration is set to the 4 wire SPI communication. You can change to an I2C communication by changing the onboard...

  • CAD$19.99 In Stock

    A Feather board without ambition is a Feather board without FeatherWings! This is the FeatherWing OLED: it adds a 128x32 monochrome OLED plus 3 user buttons to any Feather main board.

  • CAD$23.50 In Stock

    An LCD display that can display a max of 16x2 characters. with the help of the I2C bus convertor and related libraried, you can easily use this module with just 2 wires.

  • CAD$27.85 In Stock

    This LCD enables you to set the color to whatever you like via the simple interface. It takes I2C as communication method with your microcontroller. So number of pins required for data exchange and backlight control shrinks from ~10 to 2, relieving IOs for other challenging tasks. Besides, Grove - LCD RGB Backlight supports user-defined characters. Want...

  • CAD$28.85 In Stock

    An LCD display that can display a max of 20x4 characters. with the help of the I2C bus convertor and related libraried, you can easily use this module with just 2 wires.

  • CAD$19.50 In Stock

    This is a breadboard friendly, 2.54mm pitch, I2C controlled 8x2 characters LCD board for 5V microcontroller. It has the pull-up resistors for I2C bus in it. It is the 2.54mm pitch, so you can plug in the breadboard and Arduino. The pin assignment is same as Arduino Uno “Analog” pins which are used for I2C connection. It has the pull-up resistors for I2C...

  • CAD$13.25 In Stock

    This is a basic 16 character by 2 line display with a snazzy blue backlight with white characters. Utilizes the extremely common HD44780 parallel interface chipset. Interface code is freely available.  

  • CAD$19.25 In Stock

    This is a basic 16 character by 2 line display with a snazzy black backlight with red characters. Utilizes the extremely common HD44780 parallel interface chipset. Interface code is freely available.

  • CAD$18.75 In Stock

    This is similar to other 16x2 character LCDs that you’ve seen before but with one vibrant difference: The backlight is actually an RGB LED. This means that you can change the backlight of this display to any color you want by controlling the three backlight levels. It also utilizes an extremely common parallel interface so code is freely available (check...

  • CAD$23.00 In Stock

    This is a fancy upgrade to standard 16x2 LCDs, instead of just having blue and white, or red and black, this LCD has full color RGB characters on a dark/black background! That means you can change the character display colors to anything you want - red, green, blue, pink, white, purple yellow, teal, salmon, chartreuse. This LCD looks strikingly good in...

  • CAD$19.50 In Stock

    This is a basic 20 character by 4 line display with a snazzy blue backlight with white characters. Utilizes the extremely common HD44780 parallel interface chipset. Interface code is freely available.  

  • CAD$19.35 In Stock

    This is a 16 character by 2 line display that runs at 3.3V. Utilizes the common ST7066/HD44780 parallel interface. Interface code is widely available for many different controllers and systems.

  • CAD$19.50 In Stock

    This is a 16 character by 2 line display that runs at 3.3V. Utilizes the common ST7066/HD44780 parallel interface. Interface code is widely available for many different controllers and systems.

  • CAD$17.50 In Stock

    LCD backpacks reduce the number of pins needed to connect to an LCD. LCDs are a fun and easy way to have your microcontroller project talk back to you. Character LCDs are common, and easy to get, available in tons of colors and sizes. 

No products

To be determined Shipping
CAD$0.00 Total

Check out