Take a look at our selection of different LED Matrix here! – Matrix Displays, 8×8, Red, Yellow, Green, Blue, White and more…
LED Matrix
Showing all 11 results
- LEDs & LCDs, LED Drivers, LED Matrix
16×8 LED Matrix I2C Backpack
This is the magic sauce in our 7-segment and matrix backpacks, now available in breadboard-friendly breakout board format. The HT16K33 is a neat little chip that has the ability to drive a multiplexed 16×8 matrix (that’s 128 individual LEDs). The communication protocol is I2C so it uses only 2 pins, and you can have up to 8 selectable I2C addresses so thats a total of 8 matrices, each one controlling 16×8 LEDs for 1024 total LEDs.
Part Number: PROLE-001427 - LEDs & LCDs, LED Matrix, RGB LEDs, WS2812 Addressable LEDs
8×8 RGB WS2812 Addressable LED Matrix
This WS2812 RGB Matrix consists of 64 independent WS2812 5050 RGB LEDs arranged in a 8×8 grid. The WS2812 LED driver chip allows these 5050 RGB LED to be independently addressed and controlled.
Part Number: LEDMX-001488 - LEDs & LCDs, LED Matrix, Raspberry Pi, Raspberry Pi Displays
16×8 LED Matrix Board for Raspberry Pi
There are limited I/O pins on the Raspberry Pi which makes driving 128 LEDs quite an impossible task. This LED Matrix Board was specifically designed for the Raspberry Pi which uses 1 SPI interface (3 IO + 2 enabled) to control 64 LEDs which makes LED control for the Raspberry Pi much easier!
This module is compatible with the Raspberry Pi B, B+, Raspberry Pi 2 Model B. Just make sure you connect the GPI01 pin with the GPIO1 pin on the LED matrix board.
Part Number: RASPD-008800