Take a look at our selection of different Servo Motors here! – 180 Degree Servo Motors, Continuous Servo Motors, Full Rotation Servo Motors and more…
Servo Motors
Showing all 19 results
- Motors, Servo Motors
Full Rotation Micro Servo Motor (1.5kg*cm)
The FS90R micro full rotation servo motor has dimensions of 23.2mm x 12.5mm x 22mm. The operating voltage for this motor ranges between 4.8 to 6V. Unlike the traditional servo motors which can only rotate around 180 degrees, this servo motor can be continuously rotated like a DC gear motors. This servo motor comes with the servo horns and related hardware components.
Part Number: UMTRS-092820 - Motors, Servo Motors
Full Rotation Servo Motor (6kg*cm)
The FS5106R high torque full rotation servo motor has dimensions of 40.7 x 20.5 x 39.5mm. The operating voltage for this motor ranges between 4.8 to 6V. Unlike the traditional servo motors which can only rotate around 180 degrees, this servo motor has continuous rotation which can be used similar to DC gear motors. This servo motor comes with the servo horns and related hardware components.
Part Number: UMTRS-093351 - Motors, Servo Motors
Sub Micro Servo Motor (0.6kg*cm)
This sub micro size servo motor has dimensions of 23 x 11 x 29mm. The operating voltage for this motor ranges between 4.8 to 6V with a maximum rotation of roughly 120 degrees. This servo motor comes with the servo horns and related hardware components.
Part Number: UMTRS-001052 - Motors, Servo Motors
Micro Servo Motor (1.5kg*cm)
The FS90 micro servo motor has dimensions of 23.2mm 12.5mm 22 mm. The operating voltage for this motor ranges between 4.8 to 6V with a maximum rotation of roughly 120 degrees. This servo motor comes with the servo horns and related hardware components.
Part Number: UMTRS-003066 - Motors, Servo Motors
Mini Servo Motor (3.2kg*cm)
The S05NF mini servo motor has dimensions of 28.8 x 13.8 x 30.2mm. The operating voltage for this motor ranges between 4.8 to 6V with a maximum rotation of roughly 180 degrees. This servo motor comes with the servo horns and related hardware components.
Part Number: UMTRS-103330 - Motors, Servo Motors
Servo Motor (3.2kg*cm)
The FS5103B standard servo motor has dimensions of 40.8mm x 20.1mm x 38mm. The operating voltage for this motor ranges between 4.8 to 6V with a maximum rotation of roughly 120 degrees. This servo motor comes with the servo horns and related hardware components.
Part Number: UMTRS-001103 - Motors, Servo Motors
High Torque Servo Motor (14kg*cm)
The FS5113M high torque standard servo motor has dimensions of 40.8mm x 20.1mm x 38mm. The operating voltage for this motor ranges between 4.8 to 6V with a maximum rotation of roughly 180 degrees. This servo motor comes with the servo horns and related hardware components.
Part Number: UMTRS-001113 - Motors, Servo Motors
Super High Torque Servo Motor (16kg*cm)
The FS5115M super high torque standard servo motor has dimensions of 40.8mm x 20.1mm x 38mm. The operating voltage for this motor ranges between 4.8 to 6V with a maximum rotation of roughly 180 degrees. This servo motor comes with the servo horns and related hardware components.
Part Number: UMTRS-001057 - Motors, Servo Motors
Analog Feedback Servo Motor (1.6kg*cm)
You can read this wire with an analog input such as those on an Arduino, to get the servo’s position. That information can be used in robotics to improve stability or even allow ‘recording’ of servo motion. The dimensions of this analog feedback motor are 11.57 x 22.75 x 29.45mm. The operating voltage for this motor ranges between 4.8 to 6V. Servo horns and associated hardware are also included in the package.
Part Number: UMTRS-001475 - Motors, Servo Motors
3 Channel Manual Servo Controller
This 3 Channel Manual Servo Controller is an easy way to test any servo motors. You can drive up to 3 independent servo motors with this controller by simply connecting the servo motor along with a power source of 4.8 to 6V into the controller.
Part Number: PROSR-009763 - Motors, Servo Motors
Micro Maestro 6-Channel USB Servo Driver
The six-channel Micro Maestro raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control. Whether you want high-performance servo control (0.25 s resolution with built-in speed and acceleration control) or a general I/O controller (e.g. to interface with a sensor or ESC via your USB port), this tiny, versatile device will deliver. Header pins are included but not soldered into this partial kit version (all surface-mount components are soldered).
Part Number: PROMR-001351 - Motors, Servo Motors
PCA9685 – 16 Channel PWM Servo Driver
The PCA9685 can help solve the problem of limited digital I/O on your microcontroller. As long as you have an I2C communication function available, you can hook the I2C pin to the PCA9685 board. The PCA9685 board has a built-in clock and PWM drivers, which means you do not required to constantly send signals over from your microcontroller.
Part Number: ICSPE-001622 - Motors, Servo Motors
TLC5940 – 16 Channel PWM Servo Driver
The TLC5940 is a 16 channel PWM unit with 12 bit duty cycle control (0-4095), 6 bit current limit control (0-63), and a daisy chainable serial interface. This breakout board is a good way to take full advantage of this useful IC. All 16 PWM channels are broken out to standard 0.1″ headers, which run alongside convenient voltage and ground rails. Also, because the TLC5940 can be daisy-chained, the breakout is designed to support that feature. On the left-hand side of the board all serial inputs are broken out to 0.1″ headers and likewise with output on the right-hand side.
Part Number: ICSPE-005946 - Arduino, Arduino Motor Drivers, Microcontrollers, Motors, Gear Motors, Servo Motors, Stepper Motors
4 Channel Motor Shield – 1.2A
Arduino, Arduino Motor Drivers, Microcontrollers, Motors, Gear Motors, Servo Motors, Stepper Motors4 Channel Motor Shield – 1.2A
This motor driver shield can drive up to 4 DC motor with 2 servo motors or 2 stepper motors with 2 servo motors. This motor driver shield uses 2x L293D motor controller chip with a 74HC595 shift register for all of its functions.
Part Number: ARDME-002930 - Arduino, Arduino Motor Drivers, Microcontrollers, Motors, Servo Motors
6 Channel Power PWM Driver Shield
Arduino, Arduino Motor Drivers, Microcontrollers, Motors, Servo Motors6 Channel Power PWM Driver Shield
This shield allows you to use a computer power supply (or other power source) to use your Arduino to switch high current. With RFP30N06LE MOSFETS, you can easily control a lot of current directly from your Arduino.
Part Number: PROPD-010618 - Arduino, Arduino Motor Drivers, Gear Motors, Microcontrollers, Motors, Servo Motors, Stepper Motors
ComMotion 4 Channel Motor Shield – 4A
Arduino, Arduino Motor Drivers, Gear Motors, Microcontrollers, Motors, Servo Motors, Stepper MotorsComMotion 4 Channel Motor Shield – 4A
This is the ComMotion Motor Driver Shield, a 4 channel motor controller that can communicate via I2C and be wirelessly controlled. This shield allows you to be able to control up to 4 motors at a time, read their encoders, and monitor their current draw all from one board. This powerful little shield fits snuggly on top of your RedBoard, Arduino, or any other development board that utilizes the R3 layout.
Part Number: PROMR-013257 - Motors, Gear Motors, Servo Motors, Stepper Motors, Raspberry Pi, Raspberry Pi Motor Drivers
4 Channel Motor Hat for Raspberry Pi – 1.2A
Motors, Gear Motors, Servo Motors, Stepper Motors, Raspberry Pi, Raspberry Pi Motor Drivers4 Channel Motor Hat for Raspberry Pi – 1.2A
This Raspberry Pi add-on is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control. Since the Raspberry Pi does not have a lot of PWM pins, we use a fully-dedicated PWM driver chip onboard to both control motor direction and speed. This chip handles all the motor and speed controls over I2C. Only two pins (SDA & SCL) are required to drive the multiple motors, and since it’s I2C you can also connect any other I2C devices or HATs to the same pins.
Part Number: RASPB-002348 - Motors, Servo Motors, Raspberry Pi, Raspberry Pi Motor Drivers
16 Channel PWM/Servo Hat for Raspberry Pi
Motors, Servo Motors, Raspberry Pi, Raspberry Pi Motor Drivers16 Channel PWM/Servo Hat for Raspberry Pi
The Raspberry Pi is a wonderful little computer, but one thing it isn’t very good at is controlling DC Servo Motors – these motors need very specific and repetitive timing pulses to set the position. Instead of asking the Pi Linux kernel to send these signals, pop on this handy HAT! It adds the capability to control 16 Servos with perfect timing. It can also do PWM up to 1.6 KHz with 12 bit precision, all completely free-running.
Part Number: RASPS-002327 - Motors, Servo Motors
18″ Servo Switch Harness
This 18″ (45 cm) harness has an inline on/off switch, with a 0.1″ 3-pin female connector on one end and both a male and a female connector on the other. This 3-wire harness can be used to add a toggle switch between any two devices that can be connected with JR style servo connectors. One side of the switch has a lead with a female connector, while the other side has two leads, one male and one female.
Part Number: UMTRS-002171