There are 19 products.

  • $1.10 In Stock

    This 17mm rotary potentiometer is rated for 1/4W which has a total of 18 teeth. The shaft diameter is 6mm and a length of 10mm. Most of our knobs will fit this potentiometer! Note: Please select the resistance value you desire in the drop down menu.

  • $3.30 In Stock

    This high quality ALPHA 24mm logarithmic rotary potentiometer has a shaft diameter of 6.3mm and a length of 8mm. Note: Please select the resistance value you desire in the drop down menu.

  • $3.35 In Stock

    This high quality ALPHA 24mm linear rotary potentiometer has a shaft diameter of 6.3mm and a length of 8mm. Note: Please select the resistance value you desire in the drop down menu.

  • $0.50 In Stock

    This general purpose 1 turn trimmer potentiometer is perfect for adding small and discrete variable reisstor to your project! The dimension of this trimmer potentiometer is 5x5mm. Note: Please select the resistance value you desire in the drop down menu.

  • $2.95 In Stock

    This is a PV36W series high percision 25 turn ceramic trimmer potentiometer. Note: Please select the resistance value you desire in the drop down menu.

  • $2.80 In Stock

    A simple slide potentiometer can go a long way. Rated at 10KOhm and 0.1W. Comes with solder tab connections. The pot has an overall travel of 20mm and has two mounting holes on top.

  • $3.75 In Stock

    A simple slide potentiometer can go a long way. Rated at 10KOhm and 0.1W. Comes with solder tab connections. The pot has an overall travel of 30mm and has two mounting holes on top.

  • $5.50 In Stock

    A simple slide potentiometer can go a long way. Rated at 10kOhm and 0.5W. Comes with solder tab connections. The taper profile for this slide can be found in the datasheet below labeled “0B”

  • $1.08 In Stock

    This knob mates with any potentiometer with a shaft diameter of 6mm. This knob has a height of 12mm and a diameter of 19mm.

  • $1.15 In Stock

    This knob mates with any potentiometer with a shaft diameter of 6mm. This knob has a height of 14mm and a diameter of 23mm.

  • $1.35 In Stock

    This knob mates with any potentiometer with a shaft diameter of 6mm. This knob has a height of 19mm and a diameter of 25mm.

  • $1.50 In Stock

    This knob mates with any potentiometer with a shaft diameter of 6mm. This knob has a height of 19mm and a diameter of 32mm.

  • $1.70 In Stock

    This knob mates with any potentiometer with a shaft diameter of 6mm. This knob has a height of 19mm and a diameter of 45mm.

  • $1.65 In Stock

    Do you need that extra push over the cliff? The Small sized GTE (Goes To Eleven) Knob can fit onto potentiometers with a 6mm wide shaft thanks to a brass insert with a set screw. This knob has a dimension of 23.6 x 14.2mm.

  • $2.50 In Stock

    Do you need that extra push over the cliff? The Small sized GTE (Goes To Eleven) Knob can fit onto potentiometers with a 6mm wide shaft thanks to a brass insert with a set screw. This knob has a dimension of 36.9 x 15.1mm

  • $2.60 In Stock

    Knobs are a great way to finish off your project and make it easier to adjust the level of your death ray. This knob mates to a 0.25" shaft. The knob slides onto the potentiometer and holds tightly with a strong friction fit. This knob has a height of 14mm and a diameter of 22mm.

No products

To be determined Shipping
$0.00 Total

Check out