Take a look at our selection of different Benchtop Power Supplies here!
Benchtop Power Supplies
Showing all 9 results
- Power, Benchtop Power Supplies, Tools
QJ1501 Benchtop Power Supply (15V 1A)
This efficient Switch-Mode power supply features an easy-to-read and accurate three-digit output meter. This output voltage can be adjusted from 0 to 15V and the output current can be limited from 0 to 1A.
Part Number: INSTR-442020 - Power, Benchtop Power Supplies, Tools
QJ200C Benchtop Power Supply (20V 2A)
This efficient Switch-Mode power supply features an easy-to-read and accurate three-digit output meter. This output voltage can be adjusted from 0 to 20V and the output current can be limited from 0 to 2A.
Part Number: INSTR-442020 - New Products, Power, Benchtop Power Supplies, Tools
PS3005 Benchtop Power Supply (30V 5A)
This efficient Switch-Mode power supply features an easy-to-read and accurate three-digit output meter. This output voltage can be adjusted from 0 to 30V and the output current can be limited from 0 to 5A.
Part Number: INSTR-441510 - Power, Benchtop Power Supplies, Tools
30V 3A Benchtop Power Supply
Benchtop DC Power Supply are often used in laboratory to provide continuous adjustable voltage and current. This is a CVCC (constant voltage constant current) single output power supply with floating gound which proivde either an adjustable output voltage of 0 to 30VDC or 0 to -30VDC with an adjustable output current of 0 to 3A. The voltage and current are adjusted by a fine potentiometer where both the output are accurately displayed on the volt and amp meter.
Part Number: INSTR-450303 - Power, Benchtop Power Supplies, Tools
30V 3A Triple Output Benchtop Power Supply
Benchtop DC Power Supply are often used in laboratory to provide continuous adjustable voltage and current. This is a CVCC (constant voltage constant current) three channel output power supply with floating ground. Two of the channels has an adjustable output voltage of 0 to 30VDC or 0 to -30VDC with an adjustable output current of 0 to 3A. The voltage and current are adjusted by a fine potentiometer where both the output are accurately displayed on the volt and amp meter. You can also switch between the parallel to series mode to combine the two channel into one, doubling the output voltage or current. The third channel has a constant output voltage of 5VDC with limited current of 3A.
Part Number: INSTR-450322 - Power, Benchtop Power Supplies, Tools
30V 5A Triple Output Benchtop Power Supply
Benchtop DC Power Supply are often used in laboratory to provide continuous adjustable voltage and current. This is a CVCC (constant voltage constant current) three channel output power supply with floating ground. Two of the channels has an adjustable output voltage of 0 to 30VDC or 0 to -30VDC with an adjustable output current of 0 to 5A. The voltage and current are adjusted by a fine potentiometer where both the output are accurately displayed on the volt and amp meter. You can also switch between the parallel to series mode to combine the two channel into one, doubling the output voltage or current. The third channel has a constant output voltage of 5VDC with limited current of 5A.
Part Number: INSTR-450352 - Power, Benchtop Power Supplies
DIY Benchtop Power Supply Kit
The benchtop power board kit was created to provide quick access to the typical voltages needed when developing physical computing projects (embedded systems). After assembling the kit you ll have access to four different voltages (3.3V, 5V, 12V and -12V) each with their own replaceable 5A fuse.
Part Number: KITSF-012867