Price Markdown

There are 32 products.

  • CAD$6.50 CAD$8.50 In Stock
    Reduced price!

    This sound sensor uses the onboard electret microphone as well as the LM386 amplifier to detect any sound that is beyond the threshold setting. The level of the threshold can be set by the on-board potentiometer. This module will output a HIGH signal when the sound is lower than the threshold, as well as LOW when the sound is higher than the threshold.

  • CAD$12.50 CAD$17.00 In Stock
    Reduced price!

    This is a 0.96" OLED display which consists a total of 128x64 (8192) individual blue OLED pixels, each one is turn on/off with the onboard controller chip. You can control this display with the I2C or SPI communications. The default configuration is set to the 4 wire SPI communication. You can change to an I2C communication by changing the onboard...

  • CAD$19.99 CAD$25.00 In Stock
    Reduced price!

    This LCD & Keypad Hat for Raspberry Pi uses a white on blue LCD which can be controlled with I2C. Simply snap the hat on top of your Raspberry Pi and load the code to start displaying right away! 

  • CAD$19.99 CAD$26.00 In Stock
    Reduced price!

    There are limited I/O pins on the Raspberry Pi which makes driving 128 LEDs quite an impossible task. This LED Matrix Board was specifically designed for the Raspberry Pi which uses 1 SPI interface (3 IO + 2 enabled) to control 64 LEDs which makes LED control for the Raspberry Pi much easier! This module is compatible with the Raspberry Pi B, B+,...

  • CAD$7.50 CAD$12.50 In Stock
    Reduced price!

    A Solid State Relay is similar to mechanic relay where it can be controlled through a digital signal. Solid State Relay generate no noise, and has a much longer life span in compared to the traditional mechanic relay. This relay board is based on the Omron G3MB SSR relay which can control up to 2A at 240VAC. In this relay there are 3 separate teminals, NO...

  • CAD$15.50 CAD$21.00 In Stock
    Reduced price!

    A Solid State Relay is similar to mechanic relay where it can be controlled through a digital signal. Solid State Relay generate no noise, and has a much longer life span in compared to the traditional mechanic relay. This relay board is based on the Omron G3MB SSR relay which can control up to 2A at 240VAC. This is a 4 Channel SSR relay module, each...

  • CAD$10.50 CAD$16.00 In Stock
    Reduced price!

    A Solid State Relay is similar to mechanic relay where it can be controlled through a digital signal. Solid State Relay generate no noise, and has a much longer life span in compared to the traditional mechanic relay. This relay board is based on the Omron G3MB SSR relay which can control up to 2A at 240VAC. This is a 2 Channel SSR relay module, each...

  • CAD$29.00 CAD$38.00 In Stock
    Reduced price!

    A Solid State Relay is similar to mechanic relay where it can be controlled through a digital signal. Solid State Relay generate no noise, and has a much longer life span in compared to the traditional mechanic relay. This relay board is based on the Omron G3MB SSR relay which can control up to 2A at 240VAC. This is a 8 Channel SSR relay module, each...

  • CAD$16.99 CAD$23.00 In Stock
    Reduced price!

    This PWM controller can be used to adjust the duty of the PWM from 5% to 95%. You can hook up a load with a maximum of 4A to this controller. You can use this PWM controller for motor speed control as well as dimming high power LEDs.  

  • CAD$19.99 CAD$27.75 In Stock
    Reduced price!

    This PWM controller can be used to adjust the duty of the PWM from 10% to 100%. You can hook up a load with a maximum of 10A to this controller. You can use this PWM controller for motor speed control as well as dimming high power LEDs.  

  • CAD$8.99 CAD$11.99 In Stock
    Reduced price!

    The LM2577 series of regulators are monolithic integrated circuits that provide all the active functions for a step-up switching regulator. This DC to DC converter uses the LM2577 as the step up regulator which allows for an output of 4-35V with a load of up to 3A.

  • CAD$15.50 CAD$23.00 In Stock
    Reduced price!

    The LM2577 series of regulators are monolithic integrated circuits that provide all the active functions for a step-up switching regulator. This DC to DC converter uses the LM2577 as the step up regulator which allows for an output of 12-35V with a load of up to 10A.

  • CAD$9.50 CAD$12.50 In Stock
    Reduced price!

    This DC to DC step down module uses the LM2596 switching regulator which provides a stable and constant power source. The output voltage can be adjusted between 1.5 to 35V with a maximum output current of 3A.

  • CAD$13.50 CAD$19.95 In Stock
    Reduced price!

    This DC to DC step down module uses the LM2596 switching regulator which provides a stable and constant power source. The output voltage can be adjusted between 1.5 to 35V with a maximum output current of 3A. This module displays the output voltage on the 7 segment display array to let you know the exact output voltage without having to test it!

  • CAD$18.00 CAD$23.00 In Stock
    Reduced price!

    This DC to DC step down module uses the XL4015 switching regulator which provides a stable and constant power source. The output voltage can be adjusted between 1.5 to 35V with a maximum output current of 5A. This module displays the output voltage on the 7 segment display array to let you know the exact output voltage without having to test it!

  • CAD$15.50 CAD$19.95 In Stock
    Reduced price!

    DC to DC modules are excellent ways to provide stable and constant power to your project. The output voltage can be adjusted between 0 to 16.5V with a maximum output current of 3A. This module displays the output voltage and current on the graphic LCD to let you know the exact output voltage and current without having to test it!

No products

To be determined Shipping
CAD$0.00 Total

Check out