Raspberry Pi

There are 52 products.

  • CAD$6.20 In Stock

    This cable will let you swap out the stock 600mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.   

  • CAD$19.00 In Stock

    Looking for a USB remote for your Raspberry Pi? This IR remote works great with the Raspberry Pi as you do not need to install any drivers to get it working. Simply connect the USB end to your Raspberry Pi and you are ready to go! Note: CR2032 battery is not included.

  • CAD$28.95 In Stock

    This is a fully functional wireless keyboard and touchpad which can fit in the palm of your hands! Aside from the standard keyboard and mouse functions, it also has exclusive page up and page down shortcuts, LED indictors, and power switch. With a universal 2.4GHz USB dongle, this remote controller is easy to use without installing extra driver in your...

  • CAD$12.50 In Stock

    This RTC is designed specifically for the Raspberry where it uses the I2C communication pin on the GPIO pins of the Raspberry Pi. This module is based on the DS1307 real time clock chip uses the CR1220 coin cell battery for its operations. With this RTC the Raspberry Pi can remember the time even if the Raspberry Pi is powered off. 

  • CAD$12.50 In Stock

    This RTC is designed specifically for the Raspberry where it uses the I2C communication pin on the GPIO pins of the Raspberry Pi. This module is based on the DS3231 real time clock chip and uses the CR1220 coin cell battery for its operations. With this RTC the Raspberry Pi can remember the time even if the Raspberry Pi is powered off. 

  • CAD$39.95 In Stock

    Arduino is a massive ecosystem, if there's a way for the Raspberry Pi GPIO interface to adapt to Arduino pinouts, it is possible to use the Pi together with vast Arduino shields and hardware/software resources. The ARPI600 is just intended for this. What's more, the ARPI600 also support XBee modules, make it easy to add wireless feature to your great...

  • CAD$33.95 In Stock

    The Raspberry Pi packs plenty of processing power in a small and inexpensive package and that makes it perfect for robot brains! The only problem? The Raspberry Pi may have plenty of low-level hardware peripherals but motor controllers aren’t one of them. That’s why the RaspiRobot project got started. The RaspiRobot board is an expansion board for the Pi...

  • CAD$12.55 In Stock

    This compact expansion board plugs directly into the GPIO header on a Raspberry Pi B+ and provides an easy and low-cost solution for driving a pair of small brushed DC motors. Its integrated DRV8835 dual motor driver allows it to operate from 1.5 V to 11 V, making it a great control option for low-voltage motors. The board can deliver a continuous 1.2 A...

  • CAD$42.00 In Stock

    This add-on board enables a Raspberry Pi B+, A+, or Pi 2 to drive a pair of brushed DC motors. Its dual MC33926 motor drivers operate from 5 V to 28 V and can deliver a continuous 3 A (5 A peak) per motor. The default pin mappings make it easy to get started using our provided software, but the board also exposes most of the driver chips’ I/O pins for...

  • CAD$39.95 In Stock

    This Raspberry Pi add-on is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control. Since the Raspberry Pi does not have a lot of PWM pins, we use a fully-dedicated PWM driver chip onboard to both control motor direction and speed. This chip handles all the motor and speed controls over I2C. Only two pins...

  • CAD$29.95 In Stock

    The Raspberry Pi is a wonderful little computer, but one thing it isn't very good at is controlling DC Servo Motors - these motors need very specific and repetitive timing pulses to set the position. Instead of asking the Pi Linux kernel to send these signals, pop on this handy HAT! It adds the capability to control 16 Servos with perfect timing. It can...

  • CAD$73.00 In Stock

    It's 10PM, do you know where your Raspberry Pi is? If you had this GPS HAT, you would! This new HAT adds our celebrated Ultimate GPS on it, so you can add precision time and location to your Raspberry Pi Model A+, B+, or Pi 2. We spun up a HAT based on our Ultimate GPS, added a coin-cell holder for RTC usage, break-outs for all the Raspberry Pi's extra...

  • CAD$19.99 CAD$26.00 In Stock
    Reduced price!

    There are limited I/O pins on the Raspberry Pi which makes driving 128 LEDs quite an impossible task. This LED Matrix Board was specifically designed for the Raspberry Pi which uses 1 SPI interface (3 IO + 2 enabled) to control 64 LEDs which makes LED control for the Raspberry Pi much easier! This module is compatible with the Raspberry Pi B, B+,...

  • CAD$19.99 CAD$25.00 In Stock
    Reduced price!

    This LCD & Keypad Hat for Raspberry Pi uses a white on blue LCD which can be controlled with I2C. Simply snap the hat on top of your Raspberry Pi and load the code to start displaying right away! 

  • CAD$34.00 In Stock

    The cute PiTFT got even more adorable with this little primary display for Raspberry Pi in HAT form! It features a 2.2" display with 320x240 16-bit color pixels. The HAT uses the high speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc.

  • CAD$58.50 In Stock

    This 4" touchscreen has a resolution of 480x320 with 16-bit color pixels. The plate uses the high speed SPI interface on the Raspberry Pi and can be used as a mini console display. Most importantly it sits directly on top of the Raspberry Pi!

No products

To be determined Shipping
CAD$0.00 Total

Check out