Raspberry Pi

There are 54 products.

  • CAD$78.00 In Stock

    This 5” TFT touchscreen uses the HDMI interface for its display with a resolution of 800x480. The touch control uses a USB interface making it extremely easy to connect with the Raspberry Pi. 

  • CAD$99.00 In Stock

    This 7” TFT capacitive touchscreen uses the HDMI interface for its display with a resolution of 800x480. The touch control uses a USB interface making it extremely easy to connect with the Raspberry Pi. 

  • CAD$4.90 In Stock

    This is a great accessory for our resistive touch screen controller breakouts. Plug your 4-pin 1mm pitch FPC into the socket end and the other end into your controller board. The socket connector on the cable is symmetric so if it isn't working the way you like, flip over the connector into the socket. 

  • CAD$8.50 In Stock

    Have you ever wanted more analog input pins on your Arduino project, but not wanted to fork out for a Mega? Or would you like to generate analogue signals? It solves both these problems as it has a single DAC (digital to analogue) converter as well as four ADCs (analogue to digital converters), all accessible via the I2C bus. If the I2C bus is new to you,...

  • CAD$3.50 In Stock

    This set of heat sink is made specifically for the Raspberry! Just apply this heat sink set if you find your Raspberry Pi is overheating. Each individual heat sink comes with thermal tape at the bottom for easy installment.

  • CAD$9.90 In Stock

    Need to extend your GPIO pins on your Raspberry Pi to a breadboard? This is the connector set you will need, the T-shape form factor will allow you to save alot of prototyping space on your breadboard!

  • CAD$6.50 In Stock

    Need to extend your GPIO pins on your Raspberry Pi to a breadboard? This U-Shape GPIO breakout board fits directly into the breadboard allowing you to connect the GPIO pins from the Raspberry Pi with a 40 Pin Ribbion Cable.

  • CAD$11.75 In Stock

    Have a raspberry pi but need a prototyping board? This board allows you to build your circuit and have it plugged right on top of your Raspberry Pi B+!

  • CAD$5.65 In Stock

    Stack multiple plates, breakouts etc onto your Raspberry Pi Model B+ with this custom-made extra-tall and extra-long 2x20 female header. The female header part has extra spaces to make it 23mm tall: when placed on your Pi, a PCB will clear the Ethernet and USB jacks. The stacky pin part is also extra-long, 10mm, so that when a standard 1.5mm thickness PCB...

  • CAD$18.50 In Stock

    The cable is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. Inside the big USB plug is a USB<->Serial conversion chip and at the end of the 36" cable are four wire - red power, black ground, white RX into USB port, and green TX out of the USB port. The power pin provides the 5V @ 500mA direct from...

  • CAD$9.50 In Stock

    The Raspberry Pi has an on-board audio jack, which is super handy for all kinds of sound effects and speech, just plug and go! However, for when you want better audio for music playback, a USB audio card can greatly improve the sound quality and volume. That's because the on-board audio is generated by a PWM output and is minimally filtered. Don't get us...

  • CAD$65.00 Out of stock
    Out of stock

    This 7” HDMI monitor has a compact design with incredibly high resolution and contrast visibility. This monitor is extremely easy to set up with the Raspberry Pi since no software configuration is required.  Note: The 12V 2A Switching Power Supply is not included.

  • CAD$88.00 In Stock

    This 7” HDMI & VGA monitor has a compact design with incredibly high resolution and contrast visibility. This monitor is extremely easy to set up with the Raspberry Pi since no software configuration is required. Simply plug in the HDMI cable and power supply and you are up and running!

  • CAD$160.00 In Stock

    This 10.1” monitor can be connected via HDMI, VGA, RCA and AV. The resolution on this monitor is 1024x600 making it suitable for many high definition applications. This monitor is extremely easy to set up with the Raspberry Pi since no software configuration is required. 

  • CAD$9.50 In Stock

    Need a cost efficient HDMI cable for your raspberry pi? This is the cable you need!

  • CAD$29.95 In Stock

    This is a HDMI to VGA (F) adapter with seperate 3.5mm mono and 3.5mm stereo output.

No products

To be determined Shipping
CAD$0.00 Total

Check out