Products found here have all been retired and can no longer be ordered. All products here are for informational purposes only.
Retired Products
Showing all 24 results
- Retired Products
VNH2SP30 High Power Motor Driver – 14A
This carrier board for ST s VNH2SP30 motor driver IC operates from 5.5 to 16 V and can deliver a continuous 14 A (30 A peak). It works with 5 V logic levels, supports ultrasonic (up to 20 kHz) PWM, and features current sense feedback (an analog voltage proportional to the motor current). Along with built-in protection against reverse-voltage, over-voltage, under-voltage, over-temperature, and over-current, these features make this product a great general-purpose motor driver.
Part Number: PROMR-008706 - Retired Products
DIY Digital Clock with Temperature Measurment Kit
This DIY electronic kit is a simple and fun little 4 digit desktop clock with temperature measurements. The overall dimensions of the clock is 35mm x 80mm x 23mm. This kit is perfect for a small soldering project that actually makes something that you can use!
Part Number: KITCK-000411 - Retired Products
16×2 Character LCD – RGB (Backlight)
This is similar to other 16×2 character LCDs that you ve seen before but with one vibrant difference: The backlight is actually an RGB LED. This means that you can change the backlight of this display to any color you want by controlling the three backlight levels. It also utilizes an extremely common parallel interface so code is freely available (check below for an Arduino example). You will need ~11 general I/O pins to interface to this LCD screen, plus an extra 3 pins for the RGB backlight.
Part Number: LCDMO-162862 - Retired Products
Audio FX Sound Board with Stereo Output – 16MB
Would you like to add audio/sound effects to your next project, without an Arduino+Shield Or maybe you don’t even know how to use microcontrollers, you just want to make a sound play whenever you press a button. What about something that has to be small and portable You are probably feeling a little frustrated: it’s been very hard to find a simple, low cost audio effects trigger that is easy to use and does not require any programming
Part Number: PROAU-002220 - Retired Products
Illuminated Rotary Encoder with Breakout Board
Rotary encoders are used similarly to potentiometers. They re different from potentiometers in that an encoder has full rotation without limits. They output gray code so that you can tell how much and in which direction the encoder has been turned. This encoder is especially cool because it has a red/green LED built in, as well as a push-button. Look below for the clear knob that goes with this potentiometer.
Part Number: ENCOD-010597