Vibration

There are 7 products.

  • CAD$2.50 In Stock

    Piezo elements come in handy when you need to detect vibration or a knock. You can use these for tap or knock sensors pretty easily by reading the voltage on the output. They can also be used for a very small audio transducer such as a buzzer. Documents:Datasheet Arduino Tutorial

  • CAD$3.90 In Stock

    Piezo elements come in handy when you need to detect vibration or a knock. You can use these for tap or knock sensors pretty easily by reading the voltage on the output. They can also be used for a very small audio transducer such as a buzzer. Documents:Arduino Tutorial

  • CAD$8.25 In Stock

    The vibration module uses both the SW-420 vibration sensor and LM393 comparator to detect if there is any vibration that is beyond the threshold. The threshold can be adjusted by the on-board potentiometer.

  • CAD$5.00 In Stock

    This basic piezo sensor from Measurement Specialties is often used for flex, touch, vibration and shock measurements. A small AC and large voltage (up to +/-90V) is created when the film moves back and forth. A simple resistor should get the voltage down to ADC levels. Can also be used for impact sensing or a flexible switch.

  • CAD$6.00 In Stock

    This basic piezo sensor from Measurement Specialties is often used for flex, touch, vibration and shock measurements. A small AC and large voltage (up to +/-90V) is created when the film moves back and forth. A simple resistor should get the voltage down to ADC levels. Can also be used for impact sensing or a flexible switch.

  • CAD$5.85 In Stock

    The Minisense 100 from Measurement Specialties is a low-cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. Useful for detecting vibration and ‘tap’ inputs from a user. A small AC and large voltage (up to +/-90V) is created when the film moves back an forth. A simple resistor should get the voltage down to...

  • CAD$11.00 In Stock

    This a high sensitivity vibration sensor often used for security detector. This sensor is highly sensitive with extremely fast response time which could be used for security applications such as anti-theft system for vehicle. The sensor will output a low logic voltage when vibration is detected. The sensitivity can be adjusted with the onboard potentiometer.

No products

To be determined Shipping
CAD$0.00 Total

Check out