There are 15 products.

  • $13.00 In Stock

    The ESP8266 processor from Espressif is an 80 MHz microcontroller with a full WiFi front-end (both as client and access point) and TCP/IP stack with DNS support as well. This is an upgrade model with 1MB flash with a default baud rate of 115200 (AT + CIOBAUD = to change the baud rate).

  • $15.00 In Stock

    This development board is based on the ESP8266 WiFi enabled microcontroller. The ESP8266 is an integrated controller what has GPIO, PWM, I2C and ADC. 

  • $23.00 In Stock

    UART WiFi is a serial transceiver module featuring the ubiquitous ESP8266 IoT SoC. With integrated TCP/IP protocol stack, this module lets your microcontroller interact with WiFi networks with only a few lines of code. Each ESP8266 module comes pre-programmed with an AT command set firmware, meaning you can send simple text commands to control the device....

  • $31.95 In Stock

    Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather HUZZAH ESP8266 - our take on an 'all-in-one' ESP8266 WiFi development board with built in USB and battery charging. Its an  ESP8266 WiFi...

  • $35.55 In Stock

    The ESP32 is a perfect upgrade from the ESP8266 that has been so popular. In comparison, the ESP32 has way more GPIO, plenty of analog inputs, two analog outputs, multiple extra peripherals (like a spare UART), two cores so you don't have to yield to the WiFi manager, much higher-speed processor, etc. etc! We think that as the ESP32 gets traction, we'll...

  • $21.90 In Stock

    The ESP32 development board uses a 2.4GHz dual-mode Wi-Fi and Bluetooth chip and can operate as a standalone microcontroller. The ESP32 is a relatively new product and is not fully documented with example codes. 

  • $59.95 In Stock

    This is the Feather M0 WiFi w/ATWINC1500 - our take on an 'all-in-one' Arduino-compatible + high speed, reliable WiFi with built in USB and battery charging. Its an Adafruit Feather M0 with a WiFi module, ready to rock! 

  • $59.95 In Stock

    Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit WICED Feather - it's our most powerful Feather yet!

  • $58.99 Out of stock
    Out of stock

    Arduino MKR1000 is a powerful board that combines the functionality of the Zero and the Wi-Fi Shield. It is the ideal solution for makers wanting to design IoT projects with minimal previous experience in networking.

  • $37.00 In Stock

    This small, robust and powerful board has WiFi and Bluetooth connectivity that combined with its low power architecture makes it a practical and cost effective solution for your connected projects.

  • $46.00 In Stock

    We know what you’re thinking, “What’s the big deal? Looks like an SD card…” Well this is no SD card! The Electric Imp is a WiFi enabled development platform powered by a Cortex-M3 processor core. “Really?” Yup. In essence, the Imp provides an easy, integrated way to connect almost any hardware device both to other devices and to internet services. It’s...

  • $18.00 In Stock

    This ESP8266 is an ultra-low power UART WiFi module. This WiFi shield is based on the ESP-12F with the ESP8266 WiFi chip. This shield is designed to easily connect your Arduino to the IoT world. 

  • $69.95 In Stock

    This RN171 WiFi Shield is a long range WiFi solution for the Arduino. You can start controlling application through the internet with a few simple instructions. The RN171 is also a complete and standalone TCP/IP wireless network module.

  • $27.50 In Stock

    This W5200 Ethernet Shield has twice the buffer size as the W5100 model and can also supports up to eight simultaneous TCP/UDP connections. This shield also has an onboard microSD socket which can be used to storage of files over the network.

  • $4.50 In Stock

    This is a 2.4G 3dBi WiFi Antenna for your DIY projects!

No products

To be determined Shipping
$0.00 Total

Check out