Take a look at our selection of different Bluetooth components here! – Bluetooth 4.0, BLE, HC05, HM10 and more…
Bluetooth
Showing all 13 results
- Wireless & IoT, Bluetooth
HC-05 Bluetooth Module
This Bluetooth is a Bluetooth V2.0+EDR 3Mbps modulation with complete 2.4GHz radio transceiver. This Bluetooth module features a single chip Bluetooth system with CMOS technology and with AFH (Adaptive Frequency Hopping). It can be configured to either Master, Slave or Loopback modes. This Bluetooth module can connect or be connected to any device supporting SPP protocol.
Part Number: PROBT-000005 - Bluetooth, Wireless & IoT
HM-10 Bluetooth Low Energy Module
This BLE 4.0 module can be used to communicate with desktop computers, smartphones, table computers and even other embedded systems. The HM-10 bluetooth chip is a highly customizable bluetooth chip with AT commands. You can also modify the role between master or slave mode as well as change the baud rate.
Part Number: PROBT-010200 - Wireless & IoT, Bluetooth
Bluefruit nRF8001 Bluetooth Low Energy Module
The Bluefruit LE (Bluetooth Smart, Bluetooth Low Energy, Bluetooth 4.0) nRF8001 Breakout allows you to establish an easy to use wireless link between your Arduino and any compatible iOS or Android (4.3+) device. It works by simulating a UART device beneath the surface, sending ASCII data back and forth between the devices, letting you decide what data to send and what to do with it on either end of the connection.
Part Number: PROBT-001697 - Wireless & IoT, Bluetooth
Bluefruit SPI Friend Bluetooth Low Energy Module
The Bluefruit LE SPI Friend makes it easy to add Bluetooth Low Energy connectivity to anything with 4 or 5 GPIO pins. With SPI, you don’t have to worry about baud rates, flow control, or giving up a hardware UART port. Connect to your Arduino or other microcontroller using the common four-pin SPI interface (MISO, MOSI, SCK and CS) plus a 5th GPIO pin for interrupts (to let the Arduino know when data or a response is ready).
Part Number: PROBT-002633 - Wireless & IoT, Bluetooth
Bluefruit UART Friend Bluetooth Low Energy Module
The Bluefruit LE UART Friend makes it easy to add Bluetooth Low Energy connectivity to anything with a hardware or software serial port. We even have nice hardware flow control so you won’t have to think about losing data. Connect to your Arduino or other microcontroller or even just a standard FTDI cable for debugging and testing.
Part Number: PROBT-002479 - Microcontrollers, Wireless Microcontrollers, Wireless & IoT, Bluetooth, Wi-Fi
ESP32 WiFi & Bluetooth Development Board
Microcontrollers, Wireless Microcontrollers, Wireless & IoT, Bluetooth, Wi-FiESP32 WiFi & Bluetooth Development Board
The ESP32 development board uses a 2.4GHz dual-mode Wi-Fi and Bluetooth chip and can operate as a standalone microcontroller. The ESP32 is a relatively new product and is not fully documented with example codes.
Part Number: PROWF-110033 - Microcontrollers, Wireless Microcontrollers, Feather, Wireless & IoT, Bluetooth, Wi-Fi
Feather HUZZAH with ESP32 WiFi & Bluetooth
Microcontrollers, Wireless Microcontrollers, Feather, Wireless & IoT, Bluetooth, Wi-FiFeather HUZZAH with ESP32 WiFi & Bluetooth
The ESP32 is a perfect upgrade from the ESP8266 that has been so popular. In comparison, the ESP32 has way more GPIO, plenty of analog inputs, two analog outputs, multiple extra peripherals (like a spare UART), two cores so you don’t have to yield to the WiFi manager, much higher-speed processor, etc. etc! We think that as the ESP32 gets traction, we’ll see more people move to this chip exclusively, as it is so full-featured.charging. Its an ESP8266 WiFi module with all the extras you need, ready to rock!
Part Number: FEATH-003405 - Microcontrollers, Feather, Wireless & IoT, Bluetooth
Feather 32u4 Bluefruit LE
Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather 32u4 Bluefruit – our take on an ‘all-in-one’ Arduino-compatible + Bluetooth Low Energy with built in USB and battery charging. Its an Adafruit Feather 32u4 with a BTLE module, ready to rock!
Part Number: FEATH-002829 - Microcontrollers, Feather, Wireless & IoT, Bluetooth
Feather M0 Bluefruit LE
Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Feather M0 Bluefruit LE – our take on an ‘all-in-one’ Arduino-compatible + Bluetooth Low Energy with built in USB and battery charging. It’s an Adafruit Feather M0 with a BTLE module, ready to rock!
Part Number: FEATH-002995 - Arduino, Microcontrollers, Wireless Microcontrollers, Wireless & IoT, Bluetooth, Wi-Fi
Arduino Nano 33 IoT
Arduino, Microcontrollers, Wireless Microcontrollers, Wireless & IoT, Bluetooth, Wi-FiArduino Nano 33 IoT
This small, robust and powerful board has WiFi and Bluetooth connectivity that combined with its low power architecture makes it a practical and cost effective solution for your connected projects.
Part Number: ARDNN-032333 - Arduino, Arduino Bluetooth, Microcontrollers, Wireless & IoT, Bluetooth
HC-05 Bluetooth Shield
The HC-05 Bluetooth Shield is an easy way to connect the Arduino to any Bluetooth device. The HC-05 Bluetooth Module is a v2.0+EDR (Enhanced Data Rate) Bluetooth which uses a2.4GHz radio transceiver with 3Mbps modulation.
Part Number: ARDBE-001108 - Arduino, Arduino Bluetooth, Microcontrollers, Wireless & IoT, Bluetooth
nRF8001 Bluetooth Low Energy Shield
Arduino, Arduino Bluetooth, Microcontrollers, Wireless & IoT, BluetoothnRF8001 Bluetooth Low Energy Shield
BLE Shield stands for Bluetooth Low Energy (BLE) Shield. It is designed to work with Arduino boards or compatibles, including Arduino Uno, Mega 2560, Leonardo and Due. It allows you to connect your Arduino boards with other BLE Central device like a smartphone or tablet.
Part Number: ARDBT-402000
