Take a look at our selection of different XBee Radios here! – XBee, ZigBee, RF Transceivers and more…
XBee Radios
Showing all 8 results
- Wireless & IoT, XBee Radios
XBee 1mW PCB Antenna – Series 1 (802.15.4)
This is the very popular 2.4GHz XBee module from Digi. These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.
Part Number: PROXB-011215 - Wireless & IoT, XBee Radios
XBee Pro 60mW PCB Antenna – Series 1 (802.15.4)
This is the very popular 2.4GHz XBee XBP24-ACI-001 module from Digi. The Pro series have the same pinout and command set of the basic series with an increase output power of 60mW! These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.
Part Number: PROXB-011216 - Wireless & IoT, XBee Radios
XBee Explorer Regulated
The XBee Explorer Regulated takes care of the 3.3V regulation, signal conditioning, and basic activity indicators (Power, RSSI and DIN/DOUT activity LEDs). It translates the 5V serial signals to 3.3V so that you can connect a 5V (down to 3.3V) system to any XBee module. The board was conveniently designed to mate directly with the SparkFun Arduino Pro series of boards for wireless bootloading and USB based configuration.
Part Number: PROXB-011373 - Wireless & IoT, XBee Radios
XBee Explorer Mini USB
This is a simple to use, USB to serial base unit for the Digi XBee line. This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. Plug the unit into the XBee Explorer, attach a mini USB cable, and you will have direct access to the serial and programming pins on the XBee unit.
Part Number: PROXB-011812 - Arduino, Arduino SD Storage, Microcontrollers, Wireless & IoT, XBee Radios
Arduino Proto Wireless Shield
Arduino, Arduino SD Storage, Microcontrollers, Wireless & IoT, XBee RadiosArduino Proto Wireless Shield
The Arduino Wireless Proto Shield is a great way to prototype wireless applications thanks to its XBee(TM) compatible socket, prototyping area and SD card connector.You can use the wireless module from Digi to create a network of Arduino boards, solder parts to the prototyping area to create your project, and use the sd card to store data you can then easily transfer to a computer.
Part Number: ARDXB-000064 - Arduino, Arduino SD Storage, Microcontrollers, Wireless & IoT, XBee Radios
XBee Wireless SD Shield
The XBee Wireless SD Shield allows for an easy way to connect the XBee modules to the Arduino without having to worry about voltage regulators and level converters. This shield also supports different SD cards including SD, SDHC, and microSD TF cards. You will need to use the onboard toggle switch to select between the size of the SD card.
Part Number: ARDSD-001109 - Arduino, Arduino SD Storage, Microcontrollers, Wireless & IoT, XBee Radios
XBee Shield
XBee radios are an awesome way to add wireless capability to your Arduino project and now it s even easier with the SparkFun XBee Shield. The shield form-factor mates directly with any dev board that has an Arduino standard footprint and equips it with wireless communication capabilities using the popular XBee module. This unit works with all XBee modules including the Series 1 and 2, standard and Pro versions.
Part Number: ARDXB-012847
