There are 79 products.

  • CAD$9.99 In Stock

    This is a handy little Bluetooth USB mini-adapter. This adapter supports Bluetooth v2.0 class 1 and has a maximum distance of up to 100m. The adapter also includes an indicator LED. Great for laptops and if you’re on the go!

  • CAD$9.50 In Stock

    This Bluetooth is a Bluetooth V2.0+EDR 3Mbps modulation with complete 2.4GHz radio transceiver. This Bluetooth module features a single chip Bluetooth system with CMOS technology and with AFH (Adaptive Frequency Hopping). It can be configured to either Master, Slave or Loopback modes. This Bluetooth module can connect or be connected to any device...

  • CAD$16.00 In Stock

    This BLE 4.0 module can be used to communicate with desktop computers, smartphones, table computers and even other embedded systems. The HM-10 bluetooth chip is a highly customizable bluetooth chip with AT commands. You can also modify the role between master or slave mode as well as change the baud rate. 

  • CAD$32.50 In Stock

    The Bluefruit LE (Bluetooth Smart, Bluetooth Low Energy, Bluetooth 4.0) nRF8001 Breakout allows you to establish an easy to use wireless link between your Arduino and any compatible iOS or Android (4.3+) device. It works by simulating a UART device beneath the surface, sending ASCII data back and forth between the devices, letting you decide what data to...

  • CAD$29.50 In Stock

    The Bluefruit LE SPI Friend makes it easy to add Bluetooth Low Energy connectivity to anything with 4 or 5 GPIO pins. With SPI, you don't have to worry about baud rates, flow control, or giving up a hardware UART port. Connect to your Arduino or other microcontroller using the common four-pin SPI interface (MISO, MOSI, SCK and CS) plus a 5th GPIO pin for...

  • CAD$29.00 In Stock

    The Bluefruit LE UART Friend makes it easy to add Bluetooth Low Energy connectivity to anything with a hardware or software serial port. We even have nice hardware flow control so you won't have to think about losing data. Connect to your Arduino or other microcontroller or even just a standard FTDI cable for debugging and testing.

  • CAD$29.00 In Stock

    Grove - BLE (dual model) v1.0 uses CSR dual mode Bluetooth chip,with the ARM architecture single chip which supports AT instructions, Users can develop flexibly according to the serial baud rate, equipment name, pairing password.

  • CAD$29.75 Out of stock
    Out of stock

    The Flora Bluefruit LE makes it easy to add Bluetooth Low Energy connectivity to your Flora. Sew 4 traces (or solder 4 wires) and BooM! Bluetooth Low Energy!

  • CAD$15.00 In Stock

    This module from Roving Networks is powerful, small, and very easy to use. This Bluetooth module is designed to replace serial cables. The Bluetooth stack is completely encapsulated. The end user just sees serial characters being transmitted back and forth. Press the ‘A’ character from a terminal program on your computer and an ‘A’ will be pushed out the...

  • CAD$38.95 Out of stock
    Out of stock

    The RN41XV is a small form factor, low power Bluetooth radio module offering plug-in compatibility for the widely used 2 x 10 (2mm) socket typically used for 802.15.4 radio modules. Based on the popular 2 x 10 (2mm) socket footprint often found in embedded applications, the Roving Networks’ RN41XV module provides Bluetooth connectivity in legacy and...

  • CAD$15.00 Out of stock
    Out of stock

    This BT remote camera shutter is basically a wireless bluetooth remote which can connect to your iOS & Android devices allowing you to take wireless pictures with your phones and tablets. Note: This product comes in different colors (black, white, red, blue, yellow, green). Product image is for reference purpose only, it may not represent the current...

  • CAD$44.25 In Stock

    Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Feather M0 Bluefruit LE - our take on an 'all-in-one' Arduino-compatible + Bluetooth Low Energy with built in USB and battery charging. It's an Adafruit...

  • CAD$69.95 In Stock

    Primo combines the processing power from the Nordic nRF52 processor, an Espressif ESP8266 for WiFi, as well as several on-board sensors and a battery charger.  The nRF52 includes NFC (Near Field Communication) and Bluetooth Smart.  The sensors include an on-board button, LED and infrared receiver and transmitter.

  • CAD$29.99 In Stock

    The ESP32 development board uses a 2.4GHz dual-mode Wi-Fi and Bluetooth chip and can operate as a standalone microcontroller. The ESP32 is a relatively new product and is not fully documented with example codes. 

  • CAD$16.50 In Stock

    The Adafruit HUZZAH ESP8266 breakout is what we designed to make working with this chip super easy and a lot of fun. We took a certified module with an onboard antenna, and plenty of pins, and soldered it onto our designed breakout PCBs.  

  • CAD$21.95 In Stock

    This is the Sparkfun ESP8266 Thing Dev Board – a development board that has been solely design around the ESP8266, with an integrated FTDI USB-to-Serial chip. The ESP8266 is a cost-effective, and very capable WiFi-enabled microcontroller. Like any microcontroller, it can be programmed to blink LEDs, trigger relays, monitor sensors, or automate coffee...

No products

To be determined Shipping
CAD$0.00 Total

Check out