Wireless

There are 80 products.

  • CAD$47.00 In Stock

    Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit WICED Feather - it's our most powerful Feather yet!

  • CAD$20.50 In Stock

    The Terminal Block Breakout FeatherWing kit is like the Golden Eagle of prototyping FeatherWings (eg. majestic, powerful, good-looking). To start, you get a nice prototyping area underneath your Feather, with extra pads for ground, 3.3V and SDA/SCL. Not one to stop there, we expanded the PCB out to 2" x 2.5" with 3.5mm pitch terminal blocks down each...

  • CAD$9.99 In Stock

    This is a handy little Bluetooth USB mini-adapter. This adapter supports Bluetooth v2.0 class 1 and has a maximum distance of up to 100m. The adapter also includes an indicator LED. Great for laptops and if you’re on the go!

  • CAD$9.50 CAD$14.50 In Stock
    Reduced price!

    This Bluetooth is a Bluetooth V2.0+EDR 3Mbps modulation with complete 2.4GHz radio transceiver. This Bluetooth module features a single chip Bluetooth system with CMOS technology and with AFH (Adaptive Frequency Hopping). It can be configured to either Master, Slave or Loopback modes. This Bluetooth module can connect or be connected to any device...

  • CAD$19.95 In Stock

    This Bluetooth is a Bluetooth V2.0+EDR 3Mbps modulation with complete 2.4GHz radio transceiver. This Bluetooth module features a single chip Bluetooth system with CMOS technology and with AFH (Adaptive Frequency Hopping). It can be configured to either Master, Slave or Loopback modes. This Bluetooth module can connect or be connected to any device...

  • CAD$16.00 In Stock

    This BLE 4.0 module can be used to communicate with desktop computers, smartphones, table computers and even other embedded systems. The HM-10 bluetooth chip is a highly customizable bluetooth chip with AT commands. You can also modify the role between master or slave mode as well as change the baud rate. 

  • CAD$36.50 Out of stock
    Out of stock

    Bluefruit EZ-Link: the best Bluetooth Serial Link device ever made. Like you, we have purchased all sorts of Bluetooth serial link modules, with high expectations - we just wanted something thatworked! But nothing ever did exactly what we wanted: there was always some configuration modes to wade through, and using one of those other modules to reprogram...

  • CAD$32.50 In Stock

    The Bluefruit LE (Bluetooth Smart, Bluetooth Low Energy, Bluetooth 4.0) nRF8001 Breakout allows you to establish an easy to use wireless link between your Arduino and any compatible iOS or Android (4.3+) device. It works by simulating a UART device beneath the surface, sending ASCII data back and forth between the devices, letting you decide what data to...

  • CAD$29.50 In Stock

    The Bluefruit LE SPI Friend makes it easy to add Bluetooth Low Energy connectivity to anything with 4 or 5 GPIO pins. With SPI, you don't have to worry about baud rates, flow control, or giving up a hardware UART port. Connect to your Arduino or other microcontroller using the common four-pin SPI interface (MISO, MOSI, SCK and CS) plus a 5th GPIO pin for...

  • CAD$29.00 Out of stock
    Out of stock

    The Bluefruit LE UART Friend makes it easy to add Bluetooth Low Energy connectivity to anything with a hardware or software serial port. We even have nice hardware flow control so you won't have to think about losing data. Connect to your Arduino or other microcontroller or even just a standard FTDI cable for debugging and testing.

  • CAD$29.50 In Stock

    The Flora Bluefruit LE makes it easy to add Bluetooth Low Energy connectivity to your Flora. Sew 4 traces (or solder 4 wires) and BooM! Bluetooth Low Energy!

  • CAD$38.95 In Stock

    The RN41XV is a small form factor, low power Bluetooth radio module offering plug-in compatibility for the widely used 2 x 10 (2mm) socket typically used for 802.15.4 radio modules. Based on the popular 2 x 10 (2mm) socket footprint often found in embedded applications, the Roving Networks’ RN41XV module provides Bluetooth connectivity in legacy and...

  • CAD$15.00 In Stock

    This BT remote camera shutter is basically a wireless bluetooth remote which can connect to your iOS & Android devices allowing you to take wireless pictures with your phones and tablets. Note: This product comes in different colors (black, white, red, blue, yellow, green). Product image is for reference purpose only, it may not represent the current...

  • CAD$16.50 In Stock

    The Adafruit HUZZAH ESP8266 breakout is what we designed to make working with this chip super easy and a lot of fun. We took a certified module with an onboard antenna, and plenty of pins, and soldered it onto our designed breakout PCBs.  

  • CAD$21.95 In Stock

    This is the Sparkfun ESP8266 Thing Dev Board – a development board that has been solely design around the ESP8266, with an integrated FTDI USB-to-Serial chip. The ESP8266 is a cost-effective, and very capable WiFi-enabled microcontroller. Like any microcontroller, it can be programmed to blink LEDs, trigger relays, monitor sensors, or automate coffee...

  • CAD$24.50 In Stock

    Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather HUZZAH ESP8266 - our take on an 'all-in-one' ESP8266 WiFi development board with built in USB and battery charging. Its an  ESP8266 WiFi...

No products

To be determined Shipping
CAD$0.00 Total

Check out