XBee & ZigBee

There are 11 products.

  • CAD$42.50 In Stock

    This is the very popular 2.4GHz XBee module from Digi. These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are...

  • CAD$41.50 In Stock

    This is the XBee XB24-Z7CIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point...

  • CAD$69.00 In Stock

    This is the very popular 2.4GHz XBee XBP24-ACI-001 module from Digi. The Pro series have the same pinout and command set of the basic series with an increase output power of 60mW! These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication...

  • CAD$9.00 In Stock

    This is a simple breakout board for the popular XBee product from Digi. This board breaks out all 20 pins of the XBee to a 0.1" standard spacing dual row header. 

  • CAD$16.35 In Stock

    This adapter board is designed to make adding wireless point-to-point or mesh networking easy!

  • CAD$14.95 In Stock

    The XBee Explorer Regulated takes care of the 3.3V regulation, signal conditioning, and basic activity indicators (Power, RSSI and DIN/DOUT activity LEDs). It translates the 5V serial signals to 3.3V so that you can connect a 5V (down to 3.3V) system to any XBee module. The board was conveniently designed to mate directly with the SparkFun Arduino Pro...

  • CAD$23.95 In Stock

    The XBee FTDI Adapter Mini USB is a compact USB to serial adapter equipped with BEE (20pin 2.0mm) sockets. This board uses the FT232RL IC for its functions. This board can be used as a FTDI to USB adapter for programming Arduino Pro Mini, as well as communicate data from the XBee transceivers to a USB device.

  • CAD$39.95 In Stock

    This is a simple to use, USB to serial base unit for the Digi XBee line. This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. Plug the unit into the XBee Explorer, attach a mini USB cable, and you will have direct access to the serial and programming pins on the XBee unit.

  • CAD$19.95 In Stock

    XBee radios are an awesome way to add wireless capability to your Arduino project and now it’s even easier with the SparkFun XBee Shield. The shield form-factor mates directly with any dev board that has an Arduino standard footprint and equips it with wireless communication capabilities using the popular XBee module. This unit works with all XBee modules...

  • CAD$18.00 In Stock

    The XBee Wireless SD Shield allows for an easy way to connect the XBee modules to the Arduino without having to worry about voltage regulators and level converters. This shield also supports different SD cards including SD, SDHC, and microSD TF cards. You will need to use the onboard toggle switch to select between the size of the SD card.

  • CAD$25.55 In Stock

    The Arduino Wireless Proto Shield is a great way to prototype wireless applications thanks to its XBee(TM) compatible socket, prototyping area and SD card connector.You can use the wireless module from Digi to create a network of Arduino boards, solder parts to the prototyping area to create your project, and use the sd card to store data you can then...

No products

To be determined Shipping
CAD$0.00 Total

Check out