Categories

Price Markdown

  • CAD$1.60 CAD$1.75 In Stock
    Reduced price!

    This is a standard AA battery enclosure with cover, on/off switch and leads which can hold 2xAA battery cell.  

  • CAD$2.20 CAD$2.50 In Stock
    Reduced price!

    This is a standard AA battery enclosure with cover, on/off switch and leads which can hold 3xAA battery cell.

  • CAD$3.50 CAD$4.99 In Stock
    Reduced price!

    This is a low cost red laser pointer. This laser is very similar to laser points which are used in lecture halls. It emits a very narrow beam of light. Note: Please use with caution. Avoid any contact with the eyes. Direct exposure between the eyes and the laser can cause blindness and other vision problems.

  • CAD$3.50 CAD$4.95 In Stock
    Reduced price!

    This is a low cost red laser pointer. This laser is very similar to laser points which are used in lecture halls. It emits a very narrow beam of light. Note: Please use with caution. Avoid any contact with the eyes. Direct exposure between the eyes and the laser can cause blindness and other vision problems.

  • CAD$5.95 CAD$7.45 In Stock
    Reduced price!

    Beyond the clear plastic, this is really just a regular, solderless breadboard. It has 2 power buses, 30 columns, and 10 rows - a total of 400 tie in points. All pins are spaced by a standard 0.1". The two sets of five rows are separated by about 0.3", perfect for straddling a DIP package over. The board accepts wire sizes in the range of 29-20AWG.This...

  • CAD$7.25 CAD$8.57 In Stock
    Reduced price!

    The ATmega328 is a high perforamnce, low power, 8-bit microcontroller. This ATmega328 comes preloaded with the uno bootloader. Documents:Datasheet

  • CAD$9.50 CAD$11.50 In Stock
    Reduced price!

    The current sensor is based on the ACS172 current sensor, which can accurately detect AC or DC current. This current sensor has sensing range of -20A to +20A AC or DC current. The analog signal can be read via analog any I /O port on the Arduino.

  • CAD$9.50 CAD$11.50 In Stock
    Reduced price!

    The current sensor is based on the ACS172 current sensor, which can accurately detect AC or DC current. This current sensor has sensing range of -5A to +5A AC or DC current. The analog signal can be read via analog any I /O port on the Arduino.

  • CAD$9.50 CAD$11.00 In Stock
    Reduced price!

    The current sensor is based on the ACS172 current sensor, which can accurately detect AC or DC current. This current sensor has sensing range of -30A to +30A AC or DC current. The analog signal can be read via analog any I /O port on the Arduino.

  • CAD$9.95 CAD$11.50 In Stock
    Reduced price!

    This board is based on the ATmega328 microcontroller. This board shares the same form factor and functionally as the Arduino Pro Mini. The Pro Mini is a small, and compact ATmega328 microcontroller. Some key features of this board includes 14 digital I/O of which 6 has PWM output, 6 analog input, 8MHz clock speed, and USB interface.  Note: This board is...

  • CAD$9.95 CAD$11.50 Out of stock
    Reduced price!
    Out of stock

    This board is based on the ATmega328 microcontroller. This board shares the same form factor and functionally as the Arduino Pro Mini. The Pro Mini is a small, and compact ATmega328 microcontroller. Some key features of this board includes 14 digital I/O of which 6 has PWM output, 6 analog input, 16MHz clock speed, and USB interface.  Note: This board is...

  • CAD$12.75 CAD$17.85 In Stock
    Reduced price!

    This pressure sensor from Freescale is a great low-cost sensing solution for measuring barometric pressure. At 1.5 hPa resolution, it's not as precise as our favorite pressure sensor, the BMP085, which has up to 0.03 hPa resolution so we don't suggest it as a precision altimeter. However, it's great for basic barometric pressure sensing. The sensor is...

  • CAD$14.50 CAD$19.50 In Stock
    Reduced price!

    The GP2Y0A41SK0F Sharp analog distance sensor features a detection range of 1.5″ to 12″ (4 cm to 30 cm). The shorter range gives you higher resolution measurements, and the lower minimum detection distance makes this sensor great for detecting very close objects. The distance is indicated by an analog voltage, making this sensor very easy to use.

  • CAD$14.50 CAD$16.15 In Stock
    Reduced price!

    This 5V wireless inductance charger uses the wire coil superposition to active the wireless charging, it can be used in electronic equipments in common use for close wireless charging or power supply. This product consisted of a transmitter and receiver, could serve as a replacement for the Wireless Power Supply with stable 5V output voltage and maximum...

  • CAD$19.99 CAD$24.99 In Stock
    Reduced price!

    This 4 Channel Relay Shield is an easy way to control high voltage applications with the Arduino. The maximum switching power for each relay is 70W. You can directly control this shield with the Arduino digital I/Os with an external 9V DC supplty.

  • CAD$21.95 CAD$27.95 In Stock
    Reduced price!

    The HC-05 Bluetooth Shield is an easy way to connect the Arduino to any Bluetooth device. The HC-05 Bluetooth Module is a v2.0+EDR (Enhanced Data Rate) Bluetooth which uses a2.4GHz radio transceiver with 3Mbps modulation.

No products

To be determined Shipping
CAD$0.00 Total

Check out