16 Pin (8×2) IDC Shrouded Header
CONID-106516The shrouded IDC header is similar to the standard pin headers. The pitch spacing for the shrouded header is 2.54mm. The shrouded IDC header is the male end for ribbon cable connectors.
$0.40 |
Customers Also Viewed
- Cables & Connectors, Power Cables & Connectors, USB, Power
2.1mm DC Barrel Plug to USB (M) Cable
This is a simple cable that adapts from a USB port to a 5.5×2.1mm barrel connector, center positive. This cable allows the user to use a USB port on a computer, laptop, or on our cigarette power supply to provide our development boards with 5V.
Part Number: ADADC-888639 - Cables & Connectors, Low Profile & Polarized
3 Pin Polarized Wire Assembly
The polarized connectors are also referred to as Molex connectors. This polarized wire set comes with a polarized socket and a 20cm polarized wire with open ended wire leads. The polarized socket has pitch spacing of 2.54mm.
Part Number: CONMX-325003 - Cables & Connectors, IDC Ribbon, Raspberry Pi, Raspberry Pi Cables & Connectors, Raspberry Pi Displays
Flex Cable for TFT Touchscreen – 8″
Cables & Connectors, IDC Ribbon, Raspberry Pi, Raspberry Pi Cables & Connectors, Raspberry Pi DisplaysFlex Cable for TFT Touchscreen – 8″
This is a great accessory for our resistive touch screen controller breakouts. Plug your 4-pin 1mm pitch FPC into the socket end and the other end into your controller board. The socket connector on the cable is symmetric so if it isn’t working the way you like, flip over the connector into the socket.
Part Number: CONFX-001662 - Cables & Connectors, Power Cables & Connectors, Switches & Relays, Latching Buttons
2.1mm DC Barrel In-Line Power Switch
Cables & Connectors, Power Cables & Connectors, Switches & Relays, Latching Buttons2.1mm DC Barrel In-Line Power Switch
Add a power switch to any project simply by plugging this between the power supply. This is the most useful thing you never knew you needed! You’ll want to pick up a bunch for your electronic projects. Comes with a 5.5/2.1mm barrel jack on one end an a plug on the other. In between is an in-line switch that is rated for 125V and 2Amps (its normally used for lamps, we suppose). Since most people will be using it with no more than 12VDC, we think it can probably handle up to 5A at that voltage.
Part Number: ADASW-001125 - Cables & Connectors, Power Cables & Connectors, Power
2.1mm DC Barrel Splitter – 2-Ways
Double up your power adapters with this wonderfully simple 2-way power jack splitter. All you have to do is connect a standard 5.5mm/2.1mm sized plug into one end, and behold, two identical plugs to use! We like the rugged molding on these adapters, and they’re really handy when you have a project with multiple pluggable devices.
Part Number: BAREX-001351
