- Type: Omni-Directional
- Dual Frequency Range: 2300 to 3800MHz & 5150 to 5875MHz
- Impedance: 50 Ohm
- Maximum VSWR: 3
- Typical Gain: 2(Max) dB
This adhesive, omni-directional antenna is perfect for situations when you re trying to get a signal out from a transmitter that you ve jammed down into an enclosure. Operating on the 2.4GHz band, it works great for WiFi, Bluetooth or ZigBee. Just connect the antenna using the attached u.fl connector and then peel and stick!
This is the very popular 2.4GHz XBee XBP24-ACI-001 module from Digi. The Pro series have the same pinout and command set of the basic series with an increase output power of 60mW! These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.
This is a glass, cylindrical RFID tag; it s very similar to those implanted into pets for identification purposes. But really guys, it s not for use inside your body. Please don t implant this thing into yourselves. Each tag comes with a unique 32-bit ID code and is not reprogrammable. The carrier frequency of this tag is 125kHz, so it works great with our ID-3LA, ID-12LA and ID-20LA RFID readers.
This is the very popular 2.4GHz XBee module from Digi. These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.
The breakout is built around the MTK3339 chipset, a no-nonsense, high-quality GPS module that can track up to 22 satellites on 66 channels, has an excellent high-sensitivity receiver (-165 dB tracking!), and a built in antenna. It can do up to 10 location updates a second for high speed, high sensitivity logging or tracking. Power usage is incredibly low, only 20 mA during navigation.
The Arduino Wireless Proto Shield is a great way to prototype wireless applications thanks to its XBee(TM) compatible socket, prototyping area and SD card connector.You can use the wireless module from Digi to create a network of Arduino boards, solder parts to the prototyping area to create your project, and use the sd card to store data you can then easily transfer to a computer.