- 5V Operating Voltage
- LCD Display Mode: STN, Positive, Transflective
- Display Color: Blue
- Driving Method : 1/16 duty, 1/5 bias
- Control Method: I2C
- Viewing Angle: 6H
An LCD display that can display a max of 20×4 characters. with the help of the I2C bus convertor and related libraried, you can easily use this module with just 2 wires.
This is a basic 16 character by 2 line display with a snazzy blue backlight with white characters. Utilizes the extremely common HD44780 parallel interface chipset. Interface code is freely available.
An LCD display that can display a max of 16×2 characters. with the help of the I2C bus convertor and related libraried, you can easily use this module with just 2 wires.
This is a breadboard friendly, 2.54mm pitch, I2C controlled 8×2 characters LCD board for 5V microcontroller. It has the pull-up resistors for I2C bus in it. It is the 2.54mm pitch, so you can plug in the breadboard and Arduino. The pin assignment is same as Arduino Uno Analog pins which are used for I2C connection. It has the pull-up resistors for I2C bus in it, so all you have to do is to solder pin header you want to use. However, please be aware that you may want to remove the resistors if you connect other I2C devices on the same bus.
The LCD Keypad Shield is an easy way to integrate a character display with the Arduino. This is a 16×2 Character LCD with white text on blue backlight.
This LCD & Keypad Hat for Raspberry Pi uses a white on blue LCD which can be controlled with I2C.