This framed white on blue graphical LCD has a resolution of 128 x 64 pixels. This is a very clear STN type LCD using simple 5V Parallel commands. The overall dimensions of the LCD is 94mm x 70mm.
The Nokia 5110 is a graphic LCD screen which are used for many applications; originally designed as a cell phone screen. The driver chip which this LCD uses is the PCD8544. The PCD8544 is a low power CMOS LCD controller/driver, designed to drive a graphic display of 48 rows and 84 columns.
This 1.44″ color TFT LCD display has 128 x 128 resolution with 262 color. This LCD uses SPI interface to communicate with controller such as the Arduino.
This 3.5 TFT LCD Shield has total resolution of 480×320 pixels with individual RGB pixel controls. This display has a controller built into it with RAM buffering, so that almost no work is done by the microcontroller. The display can be used in two modes: 8-bit or SPI. For 8-bit mode, you’ll need 8 digital data lines and 4 or 5 digital control lines to read and write to the display (12 lines total). SPI mode requires only 5 pins total (SPI data in, data out, clock, select, and d/c) but is slower than 8-bit mode.
This 3.0″ TFT LCD Mega Shield has a total resolution of 480 x 320 pixels with 262K color. The controller for the LCD module is HX8357C, it supports 16-wires DataBus interface. This shield also includes a 5V-3.3V level shifter and power regulator, SD card socket, as well as SPI FLASH circuit.
This 7 HDMI & VGA monitor has a compact design with incredibly high resolution and contrast visibility. This monitor is extremely easy to set up with the Raspberry Pi since no software configuration is required. Simply plug in the HDMI cable and power supply and you are up and running!