These aluminum gearmotor brackets let you mount 37D mm metal gearmotor to your project. The brackets are sold in individually, and each bracket includes six M3 screws for securing the motor to the bracket. Each bracket also features fourteen mounting holes for M3 or #4-size screws, giving you a variety of mounting options.
This 2.05″ ?1.45″ ?1.45″gearmotor is a powerful brushed DC motor with metal gearbox intended for operation at 12 V. These units have a 0.61″-long, 6 mm-diameter D-shaped output shaft.
This NEMA 23 size bipolar stepping motor has a 1.8 Degree step angle (200 steps/revolution). Each phase draws 2A at 3.2V, allowing for a holding torque of 9kg-cm (125 oz-in).
This 1.46″ x 0.79″ x 0.79″ gearmotor is a brushed DC motor with 120: 1 metal gearbox that has the power to deliver both speed and torque. These units have a 0.276″-long, 4 mm-diameter D-shaped output shaft.
This gearmotor is a miniature (0.94″ x 0.39″ x 0.47″), high-quality, low-current motor with 150.58: 1 metal gearbox, similar to Sanyo s popular 12 mm gearmotors. These units have a 0.365″-long, 3 mm-diameter D-shaped output shaft.
This shield makes it easy to control two high-power DC motors with your Arduino or Arduino-compatible board. Its dual robust VNH5019 motor drivers operate from 5.5 to 24 V and can deliver a continuous 12 A (30 A peak) per motor, or a continuous 24 A (60 A peak) to a single motor connected to both channels. These great drivers also offer current-sense feedback and accept ultrasonic PWM frequencies for quieter operation. The Arduino pin mappings can all be customized if the defaults are not convenient, and the motor driver control lines are broken out along the left side of the shield for general-purpose use without an Arduino.