3P 3mm LED – Red/Green
LEDMU-290033This Red/Green 3mm LED is rated for 2V 10mA. This common cathode LED will emit both red and green where the center pin is the common GND pin for both colors.
$0.60 |
Customers Also Viewed
- LEDs & LCDs, High Power LEDs
1W High Power LED – Blue
The 1W High Power LEDs are comparable in brightness with the standard incandescent and halogen light bulbs. Not only are they bright, they also consume a fraction of power making them extremely energy efficient! This high power LED is mounted onto an aluminium heat sink. Simply connect the large + and – pads on the heat sink to activate the LED. This high power LED is rated for 3.8V 350mA 470nm.
Part Number: LEDPW-211060 - LEDs & LCDs, LED Matrix, RGB LEDs, WS2812 Addressable LEDs
8×8 RGB WS2812 Addressable LED Matrix
This WS2812 RGB Matrix consists of 64 independent WS2812 5050 RGB LEDs arranged in a 8×8 grid. The WS2812 LED driver chip allows these 5050 RGB LED to be independently addressed and controlled.
Part Number: LEDMX-001488 - LEDs & LCDs, LED Strips, RGB LEDs, WS2812 Addressable LEDs
144 WS2812 RGB Addressable LED Strip
There are 144 RGB LEDs per meter, and you can control each LED individually! Yes, that’s right, this is the digitally-addressable type of LED strip. You can set the color of each LED’s red, green and blue component with 8-bit PWM precision (so 24-bit color per pixel). The LEDs are controlled by shift-registers that are chained up down the strip so you can shorten or lengthen the strip. Only 1 digital output pin are required to send data down. The PWM is built into each LED-chip so once you set the color you can stop talking to the strip and it will continue to PWM all the LEDs for you.
Part Number: LEDNP-001506 - LEDs & LCDs, RGB LEDs, WS2812 Addressable LEDs
24 RGB WS2812 Addressable LED Ring
This WS2812 circle consists of 24 independent WS2812 5050 RGB LEDs arranged in a circular format. The WS2812 LED driver chip allows these 5050 RGB LED to be independently addressed and controlled.
Part Number: LEDRG-001587
