- Input Voltage: 3 to 34V
- Output Voltage: 4 to 35V
- Maximum Input Current: 3A
- Maximum Output Current: 2.5A
- Typical Efficiency: 80%
The LM2577 series of regulators are monolithic integrated circuits that provide all the active functions for a step-up switching regulator. This DC to DC converter uses the LM2577 as the step up regulator which allows for an output of 4-35V with a load of up to 3A.
If you need to charge LiPo batteries, this simple charger will do just that, and do it fast! The LiPo Charger Basic is stripped down of all features and just does one thing well – charge 3.7V LiPo cells at a rate of 500mA. It is designed to charge single-cell Li-Ion or Li-Polymer batteries.
This DC to DC step down module uses the LM2596 switching regulator which provides a stable and constant power source. The output voltage can be adjusted between 1.5 to 35V with a maximum output current of 3A.
This is a high quality AC to DC switching power adapter which gives a clean regulated 12VDC output at up to 1A. These adapter works with both 110 and 240VAC input, allowing them to work in any country! The barrel plug attached to these wall adapters are center positive with 2.1mm diameter.
Double up your power adapters with this wonderfully simple 2-way power jack splitter. All you have to do is connect a standard 5.5mm/2.1mm sized plug into one end, and behold, two identical plugs to use! We like the rugged molding on these adapters, and they’re really handy when you have a project with multiple pluggable devices.
The compact (0.32 0.515 ) U3V12F12 switching step-up (or boost) voltage regulator takes an input voltage as low as 2.5 V and efficiently boosts it to 12 V. The pins have a 0.1 spacing, making this board compatible with standard solderless breadboards and perfboards.