40 Pin Raspberry Pi Cape
RASPI-002822Have a raspberry pi but need a prototyping board This board allows you to build your circuit and have it plugged right on top of your Raspberry Pi B+!
$11.75 |
Customers Also Viewed
- Raspberry Pi
USB Infrared Remote for Raspberry Pi
Looking for a USB remote for your Raspberry Pi This IR remote works great with the Raspberry Pi as you do not need to install any drivers to get it working. Simply connect the USB end to your Raspberry Pi and you are ready to go!
Note:CR2032 battery is not included.
Part Number: RASPC-276089 - Clocks & Timers, Raspberry Pi, Raspberry Pi Real Time Clocks
DS1307 Real Time Clock for Raspberry Pi
This RTC is designed specifically for the Raspberry where it uses the I2C communication pin on the GPIO pins of the Raspberry Pi. This module is based on the DS1307 real time clock chip uses the CR1220 coin cell battery for its operations. With this RTC the Raspberry Pi can remember the time even if the Raspberry Pi is powered off.
Part Number: RASPT-111307 - Cables & Connectors, IDC Ribbon, Raspberry Pi, Raspberry Pi Cables & Connectors, Raspberry Pi Displays
Flex Cable for TFT Touchscreen – 8″
Cables & Connectors, IDC Ribbon, Raspberry Pi, Raspberry Pi Cables & Connectors, Raspberry Pi DisplaysFlex Cable for TFT Touchscreen – 8″
This is a great accessory for our resistive touch screen controller breakouts. Plug your 4-pin 1mm pitch FPC into the socket end and the other end into your controller board. The socket connector on the cable is symmetric so if it isn’t working the way you like, flip over the connector into the socket.
Part Number: CONFX-001662 - Motors, Gear Motors, Servo Motors, Stepper Motors, Raspberry Pi, Raspberry Pi Motor Drivers
4 Channel Motor Hat for Raspberry Pi – 1.2A
Motors, Gear Motors, Servo Motors, Stepper Motors, Raspberry Pi, Raspberry Pi Motor Drivers4 Channel Motor Hat for Raspberry Pi – 1.2A
This Raspberry Pi add-on is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control. Since the Raspberry Pi does not have a lot of PWM pins, we use a fully-dedicated PWM driver chip onboard to both control motor direction and speed. This chip handles all the motor and speed controls over I2C. Only two pins (SDA & SCL) are required to drive the multiple motors, and since it’s I2C you can also connect any other I2C devices or HATs to the same pins.
Part Number: RASPB-002348 - Raspberry Pi, Raspberry Pi Cables & Connectors
USB to Audio Adapter for Raspberry Pi
The Raspberry Pi has an on-board audio jack, which is super handy for all kinds of sound effects and speech, just plug and go! However, for when you want better audio for music playback, a USB audio card can greatly improve the sound quality and volume. That’s because the on-board audio is generated by a PWM output and is minimally filtered. Don’t get us wrong, it’s a great thing to have audio on board but this USB audio card will make it even better.
Part Number: RASPA-001475
