- Length – 0.75
- Diameter – 0.42
- Bore A ID – 1/4
- Bore B ID – 4mm
These stainless steel shaft couplers allow you to couple two size shafts together. They can be used for connecting motor shafts to drive shafts, or two different-sized shafts. These shaft couplers have a length of 0.75 , a outer diameter of 0.42 , and couple 1/4 to 4mm shafts.
This 2.05″ ?1.45″ ?1.45″gearmotor is a powerful brushed DC motor with metal gearbox intended for operation at 12 V. These units have a 0.61″-long, 6 mm-diameter D-shaped output shaft.
This NEMA 23 size bipolar stepping motor has a 1.8 Degree step angle (200 steps/revolution). Each phase draws 2A at 3.2V, allowing for a holding torque of 9kg-cm (125 oz-in).
This 1.46″ x 0.79″ x 0.79″ gearmotor is a brushed DC motor with 120: 1 metal gearbox that has the power to deliver both speed and torque. These units have a 0.276″-long, 4 mm-diameter D-shaped output shaft.
The FS5103B standard servo motor has dimensions of 40.8mm x 20.1mm x 38mm. The operating voltage for this motor ranges between 4.8 to 6V with a maximum rotation of roughly 120 degrees. This servo motor comes with the servo horns and related hardware components.
This 1.46″ x 0.79″ x 0.79″ gearmotor is a brushed DC motor with 65: 1 metal gearbox that has the power to deliver both speed and torque. These units have a 0.276″-long, 4 mm-diameter D-shaped output shaft.