Motor Rating @ 12V:
- 50: 1 gear ratio
- 300mA free run current
- 5A stall current
- 12kg*cm torque
- 6mm shaft diameter
This 2.05″ ?1.45″ ?1.45″gearmotor is a powerful brushed DC motor with metal gearbox intended for operation at 12 V. These units have a 0.61″-long, 6 mm-diameter D-shaped output shaft.
The CNC Shield makes it really simple to integrate CNC projects with the Arduino. You can add up to 4x A4988 stepper motor drivers to the CNC shield allowing for independent control of 4 bi-polar stepper motors.
The FS90 micro servo motor has dimensions of 23.2mm 12.5mm 22 mm. The operating voltage for this motor ranges between 4.8 to 6V with a maximum rotation of roughly 120 degrees. This servo motor comes with the servo horns and related hardware components.
This NEMA 16 size bipolar stepping motor has a 1.8 Degree step angle (200 steps/revolution). Each phase draws 330 mA at 12 V, allowing for a holding torque of 2.3 kg-cm (32 oz-in).
This 1.46″ x 0.79″ x 0.79″ gearmotor is a brushed DC motor with 120: 1 metal gearbox that has the power to deliver both speed and torque. These units have a 0.276″-long, 4 mm-diameter D-shaped output shaft.