Product Description
Features:
- Operating Voltage: 4.5 to 6V
- Internal Frequency: 800kHz
- Single Wire Single Transmission
Documents:
This RGB LED is a PTH addressable LED with a built in WS2812 LED controller. The PTH version is very similar to the SMD version except it is a lot simpler to solder and use in projects.
$1.80 |
Features:
Documents:
The 3W High Power LEDs are even brighter than standard incandescent and halogen light bulbs. Not only are they bright, they also consume a fraction of power making them extremely energy efficient! This high power LED is mounted onto an aluminium heat sink. Simply connect the large + and – pads on the heat sink to activate the LED. This high power LED is rated for 3.8V 700mA 470nm.
The 1W High Power LEDs are comparable in brightness with the standard incandescent and halogen light bulbs. Not only are they bright, they also consume a fraction of power making them extremely energy efficient! This high power LED is mounted onto an aluminium heat sink. Simply connect the large + and – pads on the heat sink to activate the LED. This high power LED is rated for 3.7V 350mA.
Make your own smart LED arrangement with the same integrated LED that is used in our NeoPixel strip and pixels. This tiny 5050 (5mm x 5mm) RGB LED is fairly easy to solder and is the most compact way possible to integrate multiple bright LEDs to a design. The driver chip is inside the LED and has ~18mA constant current drive so the color will be very consistent even if the voltage varies, and no external choke resistors are required making your design minimal. Power the whole thing with 5VDC and you’re ready to rock.
This WS2812 RGB Matrix consists of 64 independent WS2812 5050 RGB LEDs arranged in a 8×8 grid. The WS2812 LED driver chip allows these 5050 RGB LED to be independently addressed and controlled.