- Supply Voltage: 4.5 to 24V
- Output Current: 25mA
- Operating Temperature: -40Degree C to 85Degree C
- Unipolar Output
Thermocouples are best used for measuring temperatures that can go above 100 Degree C. This is a bare wires bead-probe which can measure air or surface temperatures. Most inexpensive thermocouples have a vinyl covering which can melt at around 200 Degree C, this one uses a fiberglass braid so it can be used in high temperature measurements such as heaters and ovens. There’s a small piece of heat shrink on the end to keep the fiberglass from fraying. If you’re using at >250 Degree C temperatures, simply remove it with a small blade.
The DHT22 (also known by RHT-03) is a low cost humidity and temperature sensor with a single wire digital interface. The sensor is calibrated and doesn t require extra components so you can get right to measuring relative humidity and temperature.
This semiconductor gas sensor detects the presence of methane (CNG) gas at concentrations from 300 ppm to 10,000 ppm, a range suitable for detecting gas leaks. The sensor s simple analog voltage interface requires only one analog input pin from your microcontroller.