Motor Rating @ 6V:
- Speed: 0.10sec/60 degrees
- Torque: 1.6kg*cm
You can read this wire with an analog input such as those on an Arduino, to get the servo’s position. That information can be used in robotics to improve stability or even allow ‘recording’ of servo motion. The dimensions of this analog feedback motor are 11.57 x 22.75 x 29.45mm. The operating voltage for this motor ranges between 4.8 to 6V. Servo horns and associated hardware are also included in the package.
This gearmotor is a compact (1.50″ x 0.59″ x 0.47″) brushed DC motor with 35: 1 metal gearbox. These units have a 0.365″-long, 3 mm-diameter D-shaped output shaft that matches the micro metal gearmotor output shafts.
The FS5103B standard servo motor has dimensions of 40.8mm x 20.1mm x 38mm. The operating voltage for this motor ranges between 4.8 to 6V with a maximum rotation of roughly 120 degrees. This servo motor comes with the servo horns and related hardware components.
This NEMA 16 size bipolar stepping motor has a 1.8 Degree step angle (200 steps/revolution). Each phase draws 330 mA at 12 V, allowing for a holding torque of 2.3 kg-cm (32 oz-in).
This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The little 1.3 0.8-inch board supports a wide 5.5 to 30 V voltage range and is efficient enough to deliver a continuous 15 A without a heat sink.
This 1.46″ x 0.79″ x 0.79″ gearmotor is a brushed DC motor with 65: 1 metal gearbox that has the power to deliver both speed and torque. These units have a 0.276″-long, 4 mm-diameter D-shaped output shaft.