AVR ISP Shield
ARDPG-011126The AVR ISP Shield makes it alot easy to burn bootloaders onto different AVR chips since you can bypass having to manually hook up jumper wires to the breadboard and while pinning out the AVR chip.
$18.85 |
Frequently Bought Together…
- Arduino, Microcontrollers
ATmega328 AVR Dev Board
This board is based on the ATmega328 microcontroller. This board shares the same form factor and functionally as the Arduino Uno Rev3. Some key features of this board includes 14 digital I/O of which 6 has PWM output, 6 analog input, 16MHz clock speed, and USB interface.
Note: This is an ATmega328 microcontroller board and is not a product from Arduino.
Part Number: CARDU-031366 - LEDs & LCDs, EL Wires
EL Wire – White
EL Wire, also known as electroluminescent wire is a thin phosphor coated wire in a tube which lights up when 120VAC is applied to it. EL Wires give off a neon type of glow which looks amazing in any environments! EL Wires are also extremely flexible, where it can be shaped to your liking. This EL Wire has a length of 2M.
Part Number: ELWRE-041000 - LEDs & LCDs, EL Wires
EL Wire – Red
EL Wire, also known as electroluminescent wire is a thin phosphor coated wire in a tube which lights up when 120VAC is applied to it. EL Wires give off a neon type of glow which looks amazing in any environments! EL Wires are also extremely flexible, where it can be shaped to your liking. This EL Wire has a length of 2M.
Part Number: ELWRE-050802 - LEDs & LCDs, EL Wires
5V EL Wire Inverter – 15M
This is an inverter for EL wire and tape, similar to our pocket inverters, except it is a brick that takes a 5V input. This means its good for ‘fixed’ installations since you can just plug it into a 5V wall adapter.
You can drive up to 15 meters of plain EL wire with this single inverter! This EL wire inverter also plugs right into ourEL Shield.
Part Number: ELPWR-000515 - Arduino, Microcontrollers
Arduino Uno Rev3
The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
Part Number: ARDDU-031366
Customers Also Viewed
- Arduino, Arduino Motor Drivers, Microcontrollers, Motors, Gear Motors, Servo Motors, Stepper Motors
4 Channel Motor Shield – 1.2A
Arduino, Arduino Motor Drivers, Microcontrollers, Motors, Gear Motors, Servo Motors, Stepper Motors4 Channel Motor Shield – 1.2A
This motor driver shield can drive up to 4 DC motor with 2 servo motors or 2 stepper motors with 2 servo motors. This motor driver shield uses 2x L293D motor controller chip with a 74HC595 shift register for all of its functions.
Part Number: ARDME-002930 - Arduino, Arduino Bluetooth, Microcontrollers, Wireless & IoT, Bluetooth
HC-05 Bluetooth Shield
The HC-05 Bluetooth Shield is an easy way to connect the Arduino to any Bluetooth device. The HC-05 Bluetooth Module is a v2.0+EDR (Enhanced Data Rate) Bluetooth which uses a2.4GHz radio transceiver with 3Mbps modulation.
Part Number: ARDBE-001108 - Arduino, Microcontrollers
Wixel Shield
Unleash your Arduino! This shield allows you to interface Wixel wireless modules to your Arduino (and other compatible products), enabling simple wireless programming, debugging, and control using standard Arduino software. Wixel developers can also use this item as a Wixel prototyping board.
Part Number: ARDWX-002500 - Arduino, Arduino Motor Drivers, Microcontrollers, Motors, Gear Motors
VNH5019 Dual Motor Shield – 12A
Arduino, Arduino Motor Drivers, Microcontrollers, Motors, Gear MotorsVNH5019 Dual Motor Shield – 12A
This shield makes it easy to control two high-power DC motors with your Arduino or Arduino-compatible board. Its dual robust VNH5019 motor drivers operate from 5.5 to 24 V and can deliver a continuous 12 A (30 A peak) per motor, or a continuous 24 A (60 A peak) to a single motor connected to both channels. These great drivers also offer current-sense feedback and accept ultrasonic PWM frequencies for quieter operation. The Arduino pin mappings can all be customized if the defaults are not convenient, and the motor driver control lines are broken out along the left side of the shield for general-purpose use without an Arduino.
Part Number: ARDMD-002507
