Product Description
Features:
- Bi-polar Microstepping Driver
- 2A/Phase Max
- 1.4-1.7A/Phase w/o Heatsink
- Max Motor Drive Voltage: 30V
- On-board 5V/3.3V Regulation
Documents:
Motors, Stepper Motors
Big Easy Driver Stepper Motor Driver
PROMR-011876Each Big Easy Driver can drive up to a max of 2A per phase of a bi-polar stepper motor. It is a chopper microstepping driver which defaults to 16 step microstepping mode. It can take a maximum motor drive voltage of around 30V, and includes on-board 5V/3.3V regulation, so only one supply is necessary. Although this board should be able to run most systems without active cooling while operating at 1.4-1.7A/phase, a heatsink is required for loads approaching 2A/phase.
$28.00 |
Customers Also Viewed
- 3D Printing, Arduino, Arduino Motor Drivers, Microcontrollers, Motors, Stepper Motors
CNC Shield v3.51
3D Printing, Arduino, Arduino Motor Drivers, Microcontrollers, Motors, Stepper MotorsCNC Shield v3.51
The CNC Shield makes it really simple to integrate CNC projects with the Arduino. You can add up to 4x A4988 stepper motor drivers to the CNC shield allowing for independent control of 4 bi-polar stepper motors.
Part Number: ARDCE-005510 - Motors, Servo Motors
Mini Servo Motor (3.2kg*cm)
The S05NF mini servo motor has dimensions of 28.8 x 13.8 x 30.2mm. The operating voltage for this motor ranges between 4.8 to 6V with a maximum rotation of roughly 180 degrees. This servo motor comes with the servo horns and related hardware components.
Part Number: UMTRS-103330 - Arduino, Arduino Motor Drivers, Microcontrollers, Motors, Gear Motors
Zumo Shield
This shield makes it easy to build an Arduino-controlled Zumo robot. The shield mounts onto an assembled Zumo chassis, connecting directly to the chassis s battery terminals and motors, and the Arduino plugs into the shield, face down. The shield includes dual motor drivers, a buzzer for playing simple sounds and music, a user pushbutton, and a 3-axis accelerometer and compass. It boosts the battery voltage to power the Arduino, and it breaks out the Arduino I/O lines, reset button, and user LED for convenient access and to accommodate additional sensors for things like obstacle and edge detection.
Part Number: ROBOT-312504
