CircuitGear Mini

CircuitGear Mini is a 2MS/s dual channel, 11 bit oscilloscope, 200kHz DDS arbitrary waveform generator, and 8 channel digital I/O module integrated into one small, affordable, USB-powered device. Software features include a vector network analyzer, spectrum analysis, strip chart recorder, and more! USB cable included. The software works with Windows, Mac, and Linux computers.

Part Number: INSTR-014101 Category:


Product Description

Oscilloscope Features:

  • Maximum Sampling Rate: 2MS/s
  • Analog Bandwidth: 200kHz
  • Input Voltage Span: 10mV/div to 5V/div
    • +/-25Vp-p with 1X probe
    • +/-250Vp-p with 10X probe
  • Input Ranges: 9 ranges in 1: 2: 5 sequence, 2 hardware ranges
  • Vertical Calibration
  • Input A/D Resolution: 11bit
  • Input Impedance: 1Mohm ll 20pF
  • Time Base Span: 500ns/dive to 20s/div
  • Time Base Ranges: 24 steps in 1: 2: 5 sequence
  • Trigger: Normal, auto, single shot, external
  • Trigger Polarity: rising and falling
  • Trigger Level: on-screen, cursor selectable
  • Pre-Post Trigger Display: on-screen, selectable
  • Readouts: amplitude and time base cursors
  • Sample Memory: 1K points/channel
  • Display Refresh Rate: >5 updates/second
  • Interface: USB 1.0 or 2.0
  • Additional Displays: strip chart mode, X-Y plot, spectrum analysis (FFT), histogram, waveform math

Waveform Generator Features:

  • Frequency Range: 0.2Hz to 200kHz
  • Frequency Resolution: 0.2Hz
  • Output Amplitude: +/-2.75V
  • Amplitude Control: 12bit hardware
  • Offset Control: 12bit hardware
  • Vertical Resolution: 8bit (independent of amplitude)
  • Output Impedance: 150ohm
  • Standard Waveform: sine, square, triangle, ramp, noise
  • Arbitrary Waveform: 8bit resolution, vertical and horizontal

Digital I/O Features:

  • Output: 8 bit, 5 volt, HCMOS
  • Input: 8 bit, 3/5 volt, HCMOS
  • PWM: 1Hz to 125kHz variable frequency, variable duty cycle
  • Trigger: trigger in and out


Part Number: INSTR-014101 Category: