CR1632 – Coin Cell Battery
BATTG-163200This is a simple coin cell battery at 3V. Great for powering low power processors or blink an LED for weeks at a time.
$1.50 |
Customers Also Viewed
- Power, DC to DC Converters
1.5-35V 3A Adjustable Step Down Regulator
This DC to DC step down module uses the LM2596 switching regulator which provides a stable and constant power source. The output voltage can be adjusted between 1.5 to 35V with a maximum output current of 3A.
Part Number: PROPW-321230 - Power, Wall Adapters
5V 1A Switching Power Supply
This is a high quality AC to DC switching power adapter which gives a clean regulated 5VDC output at up to 1A. These adapter works with both 110 and 240VAC input, allowing them to work in any country! The barrel plug attached to these wall adapters are center positive with 2.1mm diameter.
Part Number: ADADC-400505 - Power, Wall Adapters
12V 3A Switching Power Supply
This is a high quality AC to DC switching power adapter which gives a clean regulated 12VDC output at up to 3A. These adapter works with both 110 and 240VAC input, allowing them to work in any country! The barrel plug attached to these wall adapters are center positive with 2.1mm diameter.
Part Number: ADADC-401230 - Lilypad, Power, Coin Cell Batteries, Wearable
LilyPad Coin Cell Battery Holder with Switch
This LilyPad Coin Cell Battery Holder has a small slide switch installed on the board, in-line with the power so you can shut off your project and save batteries. This slide switch is the same as is found on the LilyPad slide switch board, so it s not easy to accidentally turn off or on. Just like the original Coin Cell Battery Holder, this simple board holds a 20mm coin cell battery (such as a CR2032) and gives you 4 connection points for sewing into your project.
Part Number: LILYP-011285 - Cables & Connectors, Power Cables & Connectors, Power
2.1mm DC Barrel Splitter – 4-Ways
Quadruple your power adapters with this wonderfully simple 4-way power jack splitter. All you have to do is connect a standard 5.5mm/2.1mm sized plug into one end, and behold, four identical plugs to use! We like the rugged molding on these adapters, and they’re really handy when you have a project with multiple pluggable devices.
Part Number: BAREX-001352
