DB9 (F) Connector (Ribbon Type)
CONDB-470901This DB serial connector is a panel mount connector which has crimp-able pins for connecting to ribbon cables.
$1.90 |
Customers Also Viewed
- Alligators, Cables & Connectors, Power, Power Cables & Connectors
2.1mm DC Barrel (F) to Alligator Clip
Alligators, Cables & Connectors, Power, Power Cables & Connectors2.1mm DC Barrel (F) to Alligator Clip
Turn a wall adapter into a mini power supply with this incredibly useful adapter. A high quality molded 2.1mm DC barrel jack is brought out to red (center positive) & black (ring negative) alligator clips. Works with just about every wall adapter, good for about 2 or 3 Amps of current and up to 24VDC.
Part Number: ADADC-011328 - Cables & Connectors, Power Cables & Connectors, Power
2.1mm DC Barrel Splitter – 4-Ways
Quadruple your power adapters with this wonderfully simple 4-way power jack splitter. All you have to do is connect a standard 5.5mm/2.1mm sized plug into one end, and behold, four identical plugs to use! We like the rugged molding on these adapters, and they’re really handy when you have a project with multiple pluggable devices.
Part Number: BAREX-001352 - Cables & Connectors, IDC Ribbon, Raspberry Pi, Raspberry Pi Cables & Connectors, Raspberry Pi Displays
Flex Cable for TFT Touchscreen – 8″
Cables & Connectors, IDC Ribbon, Raspberry Pi, Raspberry Pi Cables & Connectors, Raspberry Pi DisplaysFlex Cable for TFT Touchscreen – 8″
This is a great accessory for our resistive touch screen controller breakouts. Plug your 4-pin 1mm pitch FPC into the socket end and the other end into your controller board. The socket connector on the cable is symmetric so if it isn’t working the way you like, flip over the connector into the socket.
Part Number: CONFX-001662 - Cables & Connectors, Power Cables & Connectors, Screw Terminals, Power
2.1mm DC Barrel (M) to Terminal Adapter
Cables & Connectors, Power Cables & Connectors, Screw Terminals, Power2.1mm DC Barrel (M) to Terminal Adapter
This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5×2.1mm, center-positive male barrel jack. If you need to connect bare wires to a barrel jack on an Arduino or a development board, this might be the simple solution.
Part Number: ADADC-010287
