This RTC is designed specifically for the Raspberry where it uses the I2C communication pin on the GPIO pins of the Raspberry Pi. This module is based on the DS1307 real time clock chip uses the CR1220 coin cell battery for its operations. With this RTC the Raspberry Pi can remember the time even if the Raspberry Pi is powered off.
$12.50 |
Features:
Documents:
This 7 TFT capacitive touchscreen uses the HDMI interface for its display with a resolution of 800×480. The touch control uses a USB interface making it extremely easy to connect with the Raspberry Pi.
This Raspberry Pi add-on is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control. Since the Raspberry Pi does not have a lot of PWM pins, we use a fully-dedicated PWM driver chip onboard to both control motor direction and speed. This chip handles all the motor and speed controls over I2C. Only two pins (SDA & SCL) are required to drive the multiple motors, and since it’s I2C you can also connect any other I2C devices or HATs to the same pins.
This is a 5 megapixel camera specifically designed for the Raspberry Pi. It is compatible with all revision of the Pi. The camera uses the OV5647 sensor in a fixed-focus module ensuring quality captures.
Stack multiple plates, breakouts etc onto your Raspberry Pi Model B+ with this custom-made extra-tall and extra-long 2×20 female header. The female header part has extra spaces to make it 23mm tall: when placed on your Pi, a PCB will clear the Ethernet and USB jacks. The stacky pin part is also extra-long, 10mm, so that when a standard 1.5mm thickness PCB is installed, there will be 8.5mm remaining, plenty to plug into.
This cable will let you swap out the stock 600mm long flex cable from a Raspberry Pi Camera (either ‘classic’ or ‘NoIR’ type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.
